Philco Model 70 and Electrolytics

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Philco Model 70 and Electrolytics

mikehorning
Junior Member

Posts: 18
Threads: 5
Joined: Dec 2008

02-03-2009, 09:22 AM

Thanks Ed. I wondered why 6 uF was so hard to track down. And you are right, I should have ordered these with the other capacitors, but hind site is 20-20 in this case. This is my first attempt at a restoration, so I'm learning as I go. I decided to order a dozen of them and figured I'd have a few on hand when I move on to the next project. Thanks again for the help, I hope to report that I hear music coming from it soon.

Find

« Next Oldest | Next Newest »

Messages In This Thread

Philco Model 70 and Electrolytics - by mikehorning - 02-01-2009, 10:33 PM

Re: Philco Model 70 and Electrolytics - by 49Stude63 - 02-01-2009, 11:17 PM

Re: Philco Model 70 and Electrolytics - by mikehorning - 02-02-2009, 08:01 AM

Re: Philco Model 70 and Electrolytics - by etech - 02-02-2009, 09:18 AM

Re: Philco Model 70 and Electrolytics - by mikehorning - 02-03-2009, 09:22 AM

Re: Philco Model 70 and Electrolytics - by 49Stude63 - 02-03-2009, 01:06 PM

View a Printable Version

Users browsing this thread: 1 Guest(s)

Recent Posts
Philco 38-7 Speaker
Thank you, I will check this out, I do have some shields I can place around the specific tubes. I searched the four que...tludka — 10:18 AM
Philco 38-7 Speaker
Also, check if any wires going to Grid Caps of the tubes that are supposed to be INSIDE of their respective shields (if ...morzh — 09:54 AM
Philco 38-7 Oscillation
Usually in this forum, when we discuss a radio, we do not multiply threads. You already have a thread on this. If you wa...morzh — 09:27 AM
identify very thin wire for replacement on 37-640
You can possibly use a heatshrink tubing. If you decide to replace the wire, anything gauge 24, 300V rated will do (it ...morzh — 09:25 AM
identify very thin wire for replacement on 37-640
Happy Thanksgiving, I have attche a photo of a very thin wire with black plastic-looking insulation(some of it has com...georgetownjohn — 09:14 AM
Philco 60 Squealing
I got my signal tracer out to see if I could tell at what stage the squeal was coming from. It is present on the plate o...dconant — 09:07 AM
Philco 16B Parts
The 16B's in the tombstone cabinet sport a 10 1/2" spkr vs the older cathedral sets which uses an 8". The p/p ...Radioroslyn — 12:58 AM
Philco 38-7 Oscillation
I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 11:16 PM
Philco 38-7 Speaker
I know that when I first started working on this radio, I did not even have a speaker. Once I finally found one it was n...tludka — 11:00 PM
Philco 60 Squealing
I seem to remember eliminating a squeal by changing the IF frequency by a few KHz. Not that you should put too much tru...fenbach — 08:48 PM

Who's Online

There are currently 1210 online users. [Complete List]
» 3 Member(s) | 1207 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me