[markmokris]

if you get a magnifying glass, sometimes you can see the wires and sort out which winding they are from.

Bob,

I get your point, but I CAN see the wires.  The question I am left with - There is a bottom winding with fine wire, and a winding over it with thicker wire.  Is the bottom winding with the fine wire the secondary or the primary?

It is wired into the circuit as the primary.  It seems the ohms measured is closer to what it should be for the secondary on the schematic.  

I'll will probably try it both ways.  It just is a matter of flipping two wires.

Thanks,

Mark