I dont know what to do! Decision made, Restoration begun
Posts: 18
Threads: 1
Joined: Mar 2015
City: Ripon, Wisconsin
I know this is an old thread, but it is the first time I have seen GE LC-759 and it looks almost identical to my GE LC-758. I have one in my workspace that needs some cabinet work and a recap as well. I can see if I can get some pictures of the chassis underside if you need some more information for wiring. Don't know if I can help much on the phono side as mine has been hacked and replaced with a RCA model that does not fit very well.
(This post was last modified: 08-06-2015, 02:55 PM by heats00.
Edit Reason: typed wrong model #
)
Messages In This Thread
RE: I dont know what to do! Decision made, Restoration begun - by heats00 - 08-06-2015, 02:49 PM
Users browsing this thread: 7 Guest(s)
|
Recent Posts
|
trying to identify this wire type
|
The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
trying to identify this wire type
|
Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
Philco 60 Squealing
|
All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
Philco 60 Squealing
|
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
Philco 46-420 Code 121 Reception issues
|
Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
Philco 46-420 Code 121 Reception issues
|
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
Philco 42-1008 conversion kit
|
Interesting. I haven't seen that before.klondike98 — 07:02 PM |
12' Philco
|
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
Shadow Meter Bulb
|
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
Shadow Meter Bulb
|
Ok. Thanks for the correction.RossH — 03:09 PM |
Who's Online
|
There are currently 4977 online users. [Complete List] » 2 Member(s) | 4975 Guest(s)
|
|
|
|