[heats00]

I checked voltages again on the 7X7 and had these results.  

1 = 3.4 AC
2 = 158
3 = -1.14
4 = 0
5 = -123mV (this is a new problem, I previously had -.5 here, will check physical connections)
6 = 0
7 = 0
8 = 3.4 AC

The 10M and 1M resistors hanging off pin 3 of the 7X7 look to be in the correct positions.  I did double check the resistance of the 135 ohm candohm and it is reading 159 ohms.  I can provide pictures if they would be of help.

I also checked the voltages on the 6V6's  and I found higher voltages on one tube over the other.

6V6 #6 in schematic

3 = 292 (245 expected)
4 = 291 (260 expected)
5 = -12.5 (-1.8 expected)
6 = 284 (245 expected)

6V6 #7 in schematic

3 = 263 (250 expected)
4 = 268 (260 expected)
5 = -14.4 (-1.7 expected)