08-20-2015, 10:56 PM
[Image: https://lh3.googleusercontent.com/j_gxub...38-h955-no]
How do I remove this band switch assembly? The 7F8 is underneath. I can get readings from pins 1 and 3 and they are -2.3 and 72 respectively. They seem to be lower than expected (-4.7, and 110). I can see the 33k resistor and 240 pf micamold cap under the assembly but can't get in to replace them. There are several other micamolds that look very waxy and dried out-looking resistors inside the switch also. Should I replace them while I have it out?
Also, the readings on pin 4 of both 6V6's is identical.
How do I remove this band switch assembly? The 7F8 is underneath. I can get readings from pins 1 and 3 and they are -2.3 and 72 respectively. They seem to be lower than expected (-4.7, and 110). I can see the 33k resistor and 240 pf micamold cap under the assembly but can't get in to replace them. There are several other micamolds that look very waxy and dried out-looking resistors inside the switch also. Should I replace them while I have it out?
Also, the readings on pin 4 of both 6V6's is identical.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
