Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What to do with my Philco
#1

Hello everyone. Quick introduction: My name is Morgan, I live in northern Nevada and I'm pretty new to restoring old radios.
About 15 years ago my grandfather gave me one of his old Philco radios. It didn't all quite work right, but most of it did and he figured I could fix the rest of it. We did play some old 78's on the record player, but after a short while the radio was retired to my mothers basement, where it has sat ever since. I have now been charged with the task of "doing something with it". My wife doesn't like it and it really doesn't fit in our house, so I'm probably going to end up selling it.
My question is, is it worth fixing/restoring and if so how far should I take it. From what I've gathered from reading others posts, this isn't a high demand/expensive model do they aren't going for big bucks anyway.
Any input is greatly appreciated. See below for some specs and pictures:

Philco Model 40-508
(From my grandfathers notes)
Has a leaky filter, short wave was working well, but suddenly stopped (possibly a tube)

Front
[Image: http://i.imgur.com/7z7UCLg.jpg]

Grille and Cloth
[Image: http://i.imgur.com/OxbPAQ4.jpg]

Bottom (some damage)
[Image: http://i.imgur.com/Wryh3uI.jpg]

Inside (Record player functions well, though some of the rubber mounts need to be replaced. Pretty much all of the radio stuff seem to be there)
[Image: http://i.imgur.com/lhsbl0U.jpg]

Inside of cabinet
[Image: http://i.imgur.com/VFKJpqb.jpg]

Underside of record player
[Image: http://i.imgur.com/67UL19q.jpg]

Tubes
[Image: http://i.imgur.com/DHqugOb.jpg]

Label info
[Image: http://i.imgur.com/K5boWuJ.jpg]

Thanks again for your help.


Messages In This Thread
What to do with my Philco - by Wright571 - 08-29-2015, 12:46 AM
RE: What to do with my Philco - by Eliot Ness - 08-29-2015, 08:15 AM
RE: What to do with my Philco - by OldRestorer - 08-29-2015, 08:49 AM
RE: What to do with my Philco - by Paul Philco322 - 08-29-2015, 09:04 AM
RE: What to do with my Philco - by klondike98 - 08-29-2015, 12:34 PM
RE: What to do with my Philco - by morzh - 08-29-2015, 10:42 PM
RE: What to do with my Philco - by Wright571 - 08-29-2015, 11:34 PM
RE: What to do with my Philco - by Arran - 08-30-2015, 01:37 AM



Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 858 online users. [Complete List]
» 1 Member(s) | 857 Guest(s)
Avatar

>