[Caperodder]

Ok....checking and rechecking.

I pulled the antenna coil from the chassis, and here is what I have:

From the bottom view:

Lugs -
(1 & 5) .7 ohm (This is the one I had originally rewound. 6 turns clockwise, starting toward the bottom. See pic)
(6 & 4) 6 ohm (schemo says 1 ohm)
(4 & 3) 5.5 ohm (perfect)
(3 & 2) 6.3 ohm (schemo says 1 ohm)
(5 to top of coil) 11.4 ohm (perfect)

Two questions:

1. Should I be concerned about the two 6 ohm readings?
2. Did I turn the new windings from lug 1 and 5 in the right direction?

I've checked other posts. Just looking for a sanity check.

-Brett