Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Philco Model 89L, Code 123 project
#1

My first recollection of radio in my life accured when I was about 4 years of age. I can vividly recall standing in front of my parents Philco floor model radio and listening to the music that was being broadcast from WMEX Boston. My parents had this radio in their home until the end of the 1940's when we got our first TV. Many years later having retired and a lot of free time, I decided to locate the exact model radio and restore it to use for "old time sake." Over time I found several being offered on ebay, but they were located far away and I was reluctant to have such a radio shipped to me. Some were closer but the cabinets were a disaster. Fortunately I found one 10 miles from my home and the cabinet was in excellent condition. The only thing missing from the radio were the correct Philco rosette knobs (which I can get). The radio still has the original Philco tubes! When I was in the business of restoring antique auto radios I worked on numerous Philco auto radios from the 1930's and in doing so I used the Rider manuals and diagrams as my guide. They weren't always easy to use, but they served their purpose. I am quite familiar with the Philco radio characteristics and thus was looking foward to a memorable experience with my newly gotten Philco console. However that joyous anticipation quickly came to a halt once I immersed myself into my endeavor. The radio I am hoping to restore is a Philco Model 89L Code 123 from 1933, a year in which I have discovered Philco made a number of changes during their production runs. The chassis shares some general similarities with Philco auto radios of the 1930's, but not in all areas. Household radios it appears are more of a nightmare in some instances! I have also learned that some consider this model to be the Philco radio from H***! (I haven't gone but a little ways in my efforts and have learned why this radio has that reputation!) I have the Riders volumes on CD and searching thru them have been able to print some diagrams. Alas! All but one of the diagrams that I have been able to attain agree with the chassis configuration that I have, (I got that from the internet) and that diagram along with the pictoral layout drawings are of poor quality due to "fuzziness" and blurring of printed information or images. My hope is that there exists somewhere in Philco Land a source for schematics and layout data that can be more readily understood by two very aging eyes! Any suggestions (or hints) would be much appreciated. BTW, I'm sure that this model radio has been discussed before on this forum and if so I am reluctant to bring back and old chestnut, but I find this forum to be my best resource for info. Thanx, Hal (Ex W1DRW).


Messages In This Thread
Philco Model 89L, Code 123 project - by Halsol - 10-26-2015, 11:03 AM



Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently 1671 online users. [Complete List]
» 1 Member(s) | 1670 Guest(s)
Avatar

>