Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Peck & Hills Furniture Company
#16

(11-23-2017, 12:21 PM)lasurveyor Wrote:  ........I'm going to guess that Peck & Hills Furniture in Chicago bought their radio chassis from Jesse French......

Alan, Jesse French did not make their radio chassis's, they were a piano company who decided to dabble in radios for a couple of years.  Their most popular set, the model G or Junior had a Loftin White chassis made by Sterling in Cleveland, Oh.  

So while you're most likely correct that Peck & Hills Furniture bought the chassis from someone else, it would not have been Jesse French.  I don't recognize the chassis in your radio, but if you look/ask around long enough you might spot who actually made the chassis.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#17

Looks kind of like a Day-Fan. I know that there was one of those chassis on the pile, I'll see if it is still there.

45 tube testing:

http://philcoradio.com/phorum/showthread.php?tid=16855

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#18

Thank you!! I don't think that there is any doubt that I have a Day-Fan. The chassis is identical is most ways. 

Now I seem to have a Model 5096 Day-Fan chassis, possibly a General Motors Corp. since they bought Day-Fan in 1929.

I haven't been able to find a 5096 schematic, but hopefully I can work off of a similar one. Anyone able to find a 5096?

Pretty interesting doing the reading and seeing the piano industry fretting over radio.

Thanks again, looks like Peck & Hills Furniture and Jesse French Piano both used some Day-Fan chassis'

Alan
#19

Alan, sure, no problem.

I did spot that chassis. It has been outside getting washed, but that won't hurt most of it. If you need any parts let me know, soon, as it is on it's way to be recycled. Or if you want to drive up - - it weighs a ton and the potted parts weigh half a ton.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#20

Would you ever think of making a new set of "legs", or know a woodwoorker?

Paul

Tubetalk1




Users browsing this thread:
[-]
Recent Posts
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM
Philco 42-345 Restoration/Repair
Thank you MrFixr55 the issue with this radio is that the internal coil antenna is missing and there was a wire in its pl...osanders0311 — 11:34 AM
Philco 610B oscillator wiring
Regarding the oscillator circuit which is comprised of the 6A7's cathode, control grid, and screen grid. These elements ...Radioroslyn — 10:33 AM
Philco 42-345 Restoration/Repair
Hi OSanders, First off, welcome to the Philco Phorum where Phine Phamily-Phriendly Pholks Phull of Philco Phacts and P...MrFixr55 — 08:41 AM
Philco 42-345 Restoration/Repair
Today I've been reading through the site trying to learn more about this radio. I also soldered the lose power cord cabl...osanders0311 — 08:24 PM
Philco 610B oscillator wiring
Thanks David! I do have that same later prodution model 610 schematic. I've also studied the Philco service bulletins fo...Tubester — 08:12 PM
Philco 610B oscillator wiring
Some info from Beitmans says late production. David   David — 06:06 PM
Restoring Philco 96
Oh wow! Just found this thread.  Brings me back to early days on this phorum.  I did a 96 back in 2017.  Thread here: ...rfeenstra — 06:05 PM

[-]
Who's Online
There are currently 2421 online users. [Complete List]
» 2 Member(s) | 2419 Guest(s)
AvatarAvatar

>