Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Canada 39 or 41-722 Tropic
#46

(11-13-2014, 08:34 AM)mikethedruid Wrote:  I am not sure, and don't have the records handy to check, but one reason for the difference between US and Canadian wire type, rubber covered vs. cloth covered, could be a difference between UL and CSA requirements at the time.

I suspected as much.

But what I find really interesting is that the IF transformers have/had rubber-covered leads! So I can't help but wonder how many of the parts were actually imported from USA Philco and then assembled into radios in Canada.

The two electrolytic capacitor cans in my 39, as well as the lone bakelite block, are all stamped "Made in U.S.A."

--
Ron Ramirez
Ferdinand IN
#47

 No, the Canadian electrical code had nothing to do with the lack of rubber wire in Canadian built Philcos, Rogers as well as Canadian RCA and G.E used yards of the stuff in that era, especially Rogers which used almost nothing but rubber wire, except for external wires, it it were illegal then none of them would have used rubber wire.
Regards
Arran
#48

Ron,
  We are all at various levels of knowlege and experience. I have had an interest in old radios for 50+ years. I really enjoy making them come to life again. Also I enjoy listening to and looking at them. However I never gave a lot of thought to " restoration " and certainly never seriously considered restuffing a capacitor just for looks.
  After joining this forum and seeing what others do and how it is done I better understand some aspects of why people go to that length. So I say keep up with the resoration articles because they are enjoyable and educational.
                                     Thanks for all you do.
                                                     Henry
 
#49

Henry

Thank you! I've been messing around with vintage radios for a little over 40 years now, since I was 14 years old. You do the math. 14 + 40 = old. Icon_lol

(and don't tell anyone, but I once experimented with restuffing paper caps using melted wax, decided it was too much work, and abandoned the idea until just recently, when I started restuffing paper caps again, using hot glue instead of wax to reseal them.) Icon_wink

--
Ron Ramirez
Ferdinand IN
#50

Ro,
 Your secret is safe with me.
                      Henry




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM
Hickok AC51 tube tester
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM
IF can wire size and Rubber mounts?
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM

[-]
Who's Online
There are currently 5523 online users. [Complete List]
» 2 Member(s) | 5521 Guest(s)
AvatarAvatar

>