Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Most Desirable Plastic Philcos
#1

In answer to a question on this subject that was brought up in Old Ron's Bar & Grill, here are a few examples of the most desirable plastic Philco sets.

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-10, January 1939
This model was available in different colors.

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-11, January 1939

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-21, June 1939 (1940 season)

[Image: http://philcoradio.com/gallery2/images/1...age_01.jpg]
Model PT-35, August 1939 (1940 season)
Note how this model is a clone of the TP-10 above; only the decal is different.
There is also a variant of this model with brown grille, dial pointer and knobs. Other variations in color may exist.

There are others, but the most desirable ones seem to all have Tenite grilles like the four examples above, and usually bring $100-300 or so on our favorite online auction site. Usual disclaimers apply (price depends on condition and/or desirability, not all auctioned radios bring high prices, your mileage may vary, etc.).

--
Ron Ramirez
Ferdinand IN
#2

Would these be bakelite? And the various colors then painted?

Also, what is the durability of the tenite grills?

Bill

Sent from my Pentium II on the AT&T Dial Network
#3

As far as I know, these are Bakelite, with Tenite grilles. As for the variants with bodies in different colors, I've never actually seen one so I can't say whether they are painted Bakelite or other molded plastic. All of the grilles of this style are Tenite, though.

The durability of Tenite is poor. Apparently a few of these have survived fairly well, but that is very unusual for Tenite. Just take a look at a 41-221, for example (quite different grille, but still Tenite) and you will see what I mean. The 41-221 is one of the Philcos that Larry at Old-Time Replications was thinking about reproducing, if you will recall my online poll on that subject.

--
Ron Ramirez
Ferdinand IN
#4

Happy new year everyone,

I just recently purchased a model TP-20. It's brown bakelite with tenite grille bars. Very similar to the TP-10 from 1939 but the TP-20 is, I believe, a 1940 model. I've posted photos on my website:- http://www.tuberadioland.com/philcotp-20_main.html

Regards,
Paul
#5

Paul - you are correct, the TP-20 is a 1940 model, produced between June and August 1939. In August 1939, Philco did away with all of the TP-series sets and reissued some of them with new PT-xx model numbers, adding the PHILCO name (Philco Transitone). Several new Transitones were also introduced at this time.

EDIT: Like all your sets, Paul, your TP-20 looks great! Icon_smile

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 610B oscillator wiring
I don't know what you are referring to when you say "tube cathode ground". Ground is a connection to the chass...RodB — 05:56 PM
Zenith H725
Good points, Arran. I haven't encountered this problem with any other radio (all earlier vintages), so am learning here....EdHolland — 05:32 PM
Zenith H725
Ed; One thing that I will say about these is that Brand Z was considerate enough to make these mica caps easily acces...Arran — 02:34 PM
Philco 610B oscillator wiring
Do you know what run # your chassis is? It took me a while to find what you were basing updates/modification on as I did...Radioroslyn — 07:34 AM
Need to purchase some accessories for restoration of my Old Philco Radio
COLLEAGUES, Thank you all for such good and important suggestions as how to find good replacement parts. I will go fo...palonso — 07:05 AM
Zenith H725
Here's what the inside of AM IFT2 looked like, and the other pic shows the discs I made to take place of the mica and ke...EdHolland — 07:40 PM
Zenith H725
IF2 will need replacement caps. The arcing was severe enough that the mica is pitted and holed where the HT flashed over...EdHolland — 04:04 PM
My Philco 37-116 Restore
Measuring from center tap like the tube voltages show. Cap 127 is isolated from ground. Cap 127 shown in upper left of p...dconant — 08:05 AM
My Philco 37-116 Restore
Are you measuring relative to the centertap or the GND?morzh — 11:57 PM
Philco 610B oscillator wiring
Still not clear on the wiring interface between the 6A7 and oscillator. After refering to the available schematics and s...Tubester — 07:18 PM

[-]
Who's Online
There are currently 2036 online users. [Complete List]
» 1 Member(s) | 2035 Guest(s)
Avatar

>