Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 39-116RX
#1

I have a chance at buying a 39-116RX with a working remote.
I saw the radio and it does work, the remote dial has very little warp.
First question, any ideas on a fair price and the second is how the remote can work
since nobody has ever put a battery in it????

Here's another fine mess you have gotten me into. Oliver Norville Hardy.
#2

(12-16-2015, 03:45 PM)Scottb Wrote:  I have a chance at buying a 39-116RX with a working remote.
I saw the radio and it does work, the remote dial has very little warp.
First question, any ideas on a fair price and the second is how the remote can work
since nobody has ever put a battery in it????

 Do you know what they are asking for it? Is the cabinet in nice shape? Does it need refinishing? As for it working it may seem to work now, but if it hasn't been restored electrically it's living on borrowed time, plus it has yards of rubber/gutta percha covered wire run throughout the chassis which may be deteriorating by now, so I would not pay a premium for it. If it still has the remote control that's a bonus, although the remote control boxes for these are not that hard to find.
  The remote control itself has a small transmitter with a tube inside, a type #30 I think, and when you dial a number on the control it sends out a series of pulses via longwave which is picked up by a corresponding receiver on the radio chassis. Since it has a tube it requires an "A" and a "B" voltage from a battery pack.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 4133 online users. [Complete List]
» 2 Member(s) | 4131 Guest(s)
AvatarAvatar

>