Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Most Desirable Plastic Philcos
#1

In answer to a question on this subject that was brought up in Old Ron's Bar & Grill, here are a few examples of the most desirable plastic Philco sets.

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-10, January 1939
This model was available in different colors.

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-11, January 1939

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-21, June 1939 (1940 season)

[Image: http://philcoradio.com/gallery2/images/1...age_01.jpg]
Model PT-35, August 1939 (1940 season)
Note how this model is a clone of the TP-10 above; only the decal is different.
There is also a variant of this model with brown grille, dial pointer and knobs. Other variations in color may exist.

There are others, but the most desirable ones seem to all have Tenite grilles like the four examples above, and usually bring $100-300 or so on our favorite online auction site. Usual disclaimers apply (price depends on condition and/or desirability, not all auctioned radios bring high prices, your mileage may vary, etc.).

--
Ron Ramirez
Ferdinand IN
#2

Would these be bakelite? And the various colors then painted?

Also, what is the durability of the tenite grills?

Bill

Sent from my Pentium II on the AT&T Dial Network
#3

As far as I know, these are Bakelite, with Tenite grilles. As for the variants with bodies in different colors, I've never actually seen one so I can't say whether they are painted Bakelite or other molded plastic. All of the grilles of this style are Tenite, though.

The durability of Tenite is poor. Apparently a few of these have survived fairly well, but that is very unusual for Tenite. Just take a look at a 41-221, for example (quite different grille, but still Tenite) and you will see what I mean. The 41-221 is one of the Philcos that Larry at Old-Time Replications was thinking about reproducing, if you will recall my online poll on that subject.

--
Ron Ramirez
Ferdinand IN
#4

Happy new year everyone,

I just recently purchased a model TP-20. It's brown bakelite with tenite grille bars. Very similar to the TP-10 from 1939 but the TP-20 is, I believe, a 1940 model. I've posted photos on my website:- http://www.tuberadioland.com/philcotp-20_main.html

Regards,
Paul
#5

Paul - you are correct, the TP-20 is a 1940 model, produced between June and August 1939. In August 1939, Philco did away with all of the TP-series sets and reissued some of them with new PT-xx model numbers, adding the PHILCO name (Philco Transitone). Several new Transitones were also introduced at this time.

EDIT: Like all your sets, Paul, your TP-20 looks great! Icon_smile

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently 2439 online users. [Complete List]
» 1 Member(s) | 2438 Guest(s)
Avatar

>