Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Predicta TV Conversion
#1

Got this off the RetroFuturism forum on Reddit.  Guy does some really good work here.  Guess it's for a museum display?

Philco Predicta TV Conversion
#2

What a schmuck....

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Well, it was creative .     Icon_biggrin
Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#4

Looks terrible. The 17" sets are more reliable than the earlier 21". I really doubt much, if any, effort was put into trying to repair it. I even have one running on all original components aside from a few tubes.
#5

OK, I'll re-phrase: what a schmendrik.


To me this is no different from converting a radio into a shabby crap newspaper table.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

There use to be a company that would remove the internals of your Predicta and install a SS color flat screen TV in the Predicta cabinet. It looked kinda cheesy.
Terry
#7

Cheesy like the Casu Marzu cheese. (it really stinks).

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#8

(03-31-2015, 07:50 PM)Radioroslyn Wrote:  There use to be a company that would remove the internals of your Predicta and install a SS color flat screen TV in the Predicta cabinet. It looked kinda cheesy.
Terry

I hope that they went out of business, by either going bankrupt, or the owners being sent to prison. A Chinese made flat screen in a vintage set just looks stupid, Predictas, like most TVs, had a spherical face on the picture tube, so the first thing noticeable is this large gap between the face of the plastic safety lens and the LCD screen. Also the original electronics can be made quite serviceable and reliable, especially the second generation Predicta models, and if properly restored will last for years.
Regards
Arran
#9

Predicta today is a sought after collectors item, especially if restored and functional.
It is not intended for home theater experience.
"Upgrading" it like this is a testament to the owner's stupidity as it totally loses value as Predicta and does not become a good looking and very functional modern item, as the size alone won't allow it to become adequate for home theater or even simply good viewing goals.

It is a theme or collectors item and, gutted and upgraded, it will become that Aesopian Bird in borrowed feathers, which (in Russian version) is a crow, that "left the crows, but failed to join peacocks".

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#10

There still IS a company that makes Predicta repros with color innards. Don't know if they're SD/HD or what.

http://www.predicta.com/index.shtml
#11

Well, these folks I cannot say anything bad about. They do repros, not repurposing old TVs.
If someone likes that, I won't argue, matter of taste.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

Mini Predicta:  http://www.popularmechanics.com/technolo...rinted-tv/
Terry
#13

What a crying shame I would gave him mine with the bad crt




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
The engine is a B&S 23 inch cast Iron holds 2 quarts of oil. The Generator is a 4 pole 1800 rpm mine was made in 195...David — 10:51 AM
Philco 45-6365 Universal IFT Instruction Manual
Dale: Modified topic as suggested. It is not for a specific project. I found it in a box of stuff I recently purchased...GRG — 10:34 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind ... That is a MIL-5015 style connector, used in a wide v...DaleHCook — 10:19 AM
Philco P45-6365 Universal Transformer Instruction Manual
I would suggest changing the topic from "P45-6365 Universal Transformer" to "45-6365 Universal IFT."...DaleHCook — 10:08 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated. By dconant. Dittos'Jimradio — 08:01 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind, even if it's a U.S.N power supply. I have a book somewhere abo...Arran — 02:56 AM

[-]
Who's Online
There are currently 1988 online users. [Complete List]
» 3 Member(s) | 1985 Guest(s)
AvatarAvatarAvatar

>