Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
I just finished a recap on my Montgomery Ward/Airline 94-BR1534A. It now works great on AM and FM. My only issue is a slight buzz from the power transformer. It doesn't effect the sound from the radio, but at very low volume I can still hear it. The transformer gets warm but not hot. Most of the radios I work on are AC/DC so I'm not sure if I have a problem or not.
http://www.nostalgiaair.org/Resources/979/M0011979.htm
Thanks,
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
(This post was last modified: 01-24-2016, 03:26 PM by Eric Adams.)
Posts: 4,724
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
(01-22-2016, 03:39 AM)Eric Adams Wrote: I just finished a recap on my Montgomery Ward/Airline 94-BR1534A. It now works great on AM and FM. My only issue is a slight buzz from the power transformer. It doesn't effect the sound from the radio, but at very low volume I can still hear it. The transformer gets warm but not hot. Most of the radios I work on are AC/DC so I'm not sure if I have a problem or not.
http://www.nostalgiaair.org/Resources/979/M0011979.htm
Thanks,
Eric;
I have an Italian radio that does the same thing, only much more severely, in it's case it really needs to be dipped in varnish as the core is loose, in other cases it could be loose laminations, a loose bell, or something as simple as a loose bolt.
Regards
Arran
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
So, is it something that I should go after or leave it alone?
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 1,523
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
I wish all I had was a slight buzz....on the radio  I worked on one of these for a friend and not one but ALL of the IF cans suffered from silver mica disease. Then I kept getting interference just from putting the aluminum cans back over the coils. It was a beast and I could never get the FM band to receive many stations. Now this has nothing to do with your question, other than saying if you have yours playing good, I applaud you!  
Greg V.
West Bend, WI
Member WARCI.org
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
I know what you mean, Greg. After I got mine done, the SMD started on AM only. I rebuilt one of the IF cans. This morning it is back! (not as bad) Still on AM only. Now I'm going to rebuild the other IF can. FM still sounds great.
BTW I tightened down the power Transformer and the buzz has quieted down
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 4,385
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Rtaher than the rebuilds has anyone ever tried NOS IF units? I know a fellow who had quite a few as he bot out a Radio?TV repair shop that closed. He put one in an Air King set for me and it works very well, I think most of his stock on these was post WW2 types, probably pretty generic.
Sometimes a little hum with good sensitivity and reception is not too big an issue. Enjoy your handiwork Eric.
Paul
Tubetalk1
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Hi Paul,
I actually enjoy rebuilding IFs and I'm getting good at it. You're right about the buzz. It is very slight and the radio sounds great.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 4,385
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
If you like re builds for IF trans I will be your friend, can I send you radios! Ross did a very informative class on this for our club last fall.
Paul
Tubetalk1
Posts: 15,921
Threads: 557
Joined: Oct 2011
City: Jackson, NJ
My 70 has the buzz. I tried anything, tightening and such...no luck. But it plays just fine.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
I found an easy fix! I had a junk chassis with a good transformer-swapped it and no noise. I wish all repairs were this easy!
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 15,921
Threads: 557
Joined: Oct 2011
City: Jackson, NJ
Especially with humans. I read, a Russian software engineer got his head transplanted to some other guy's body.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 5,098
Threads: 270
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Quote:Especially with humans. I read, a Russian software engineer got his head transplanted to some other guy's body.
well that probably fixed both guys...
Users browsing this thread: 3 Guest(s)
|
|
Recent Posts
|
|
Want to get my Philco working again
|
| Hi Perry and welcome,
A few notes on the 41-295/300. Probably going to need to replace some of the failing rubber coa...Radioroslyn — 11:23 PM |
|
Want to get my Philco working again
|
| Just one question, Perry. You do know that the NFC North is confirmed LION(s) Territory!?!?GarySP — 09:44 PM |
|
Want to get my Philco working again
|
| There are actually quite the host of parts websites available! There’s Mouser, Digikey, etc. for general electronics com...jrblasde — 09:44 PM |
|
Want to get my Philco working again
|
| Thank you all for the replies. I’ve gotten into old stereos too so soldering isn’t too hard. Good to hear I can get the ...Gbtr6 — 08:23 PM |
|
Want to get my Philco working again
|
| I have one of those that I restored. Not a bad sounding/performing radio. Needs new socket and all new capacitors.rfeenstra — 06:22 PM |
|
Want to get my Philco working again
|
| Welcome to the Phorum, Perry. Your console is a 41-295X. You can access the schematic in our Philco Service found at t...GarySP — 06:21 PM |
|
Want to get my Philco working again
|
| Welcome to the Phorum. The reason the tube broke is probably because of those two gold helmets on top :PRodB — 05:37 PM |
|
Want to get my Philco working again
|
| See, the model, then go to, go to Philco, put the model in, open the document, locate the tube, locate it in the sch.
Th...morzh — 03:23 PM |
|
Want to get my Philco working again
|
| Hi all,
I have an old Philco radio that i remember fondly from my younger days. It sat out on the porch of my dad's a...Gbtr6 — 03:14 PM |
|
38-690 on ebay
|
| This was discussed here last week.
And the place to post is "Items For sale online"morzh — 02:37 PM |
|
Who's Online
|
There are currently 1965 online users. [Complete List]
» 1 Member(s) | 1964 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
