Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA 35 X
#1

Hello folks-
Anyway to tell if this set uses metal tubes for the SK SA SQ tubes? Have seen a photo where they are metal, my set has glass and I am having lot of static when tuning. Icon_confused

http://www.nostalgiaair.org/pagesbymodel...014914.pdf

We are all recapped and such. 

Thanks.

Paul 

Tubetalk1
#2

(01-27-2016, 09:26 PM)Paul Philco322 Wrote:  Hello folks-
Anyway to tell if this set uses metal tubes for the SK SA SQ tubes? Have seen a photo where they are metal, my set has glass and I am having lot of static when tuning. Icon_confused

http://www.nostalgiaair.org/pagesbymodel...014914.pdf

We are all recapped and such. 

Thanks.

Paul 

 Since it is an RCA model I would bet that they were probably all metal, I'm not sure if the GT style versions require shields or not, though it probably won't help with the static much even if you added some. Does the static only come through whilst you are tuning the set? If so there may be a mechanical cause like a bad solder joint or a grounding braid that's rubbing the rotor.
Regards
Arran
#3

Yes Arran, very likely correct on the metal. I have seen some photos of the chassis and it had the metals. If I have the 3 SKs I may try a swap.

The set plays fine when on a station, the static occurs as you turn the tuing knob and scroll the band, annoying but once you get to a program you are fine. Content played thru the RCA jack sounds super. So I will check more. Thx for the suggestions.

PAul

Tubetalk1
#4

(01-28-2016, 09:19 PM)Paul Philco322 Wrote:  Yes Arran, very likely correct on the metal. I have seen some photos of the chassis and it had the metals. If I have the 3 SKs I may try a swap.

The set plays fine when on a station, the static occurs as you turn the tuing knob and scroll the band, annoying but once you get to a program you are fine. Content played thru the RCA jack sounds super. So I will check more. Thx for the suggestions.

PAul

Paul,
  Since this set has octals in it I take it that it does not have those mini IF cans with the crappy mica caps does it?
Regards
Arran
#5

Try the tube sockets pinching correctly on Pin 1 (metal sleeve ground.) Happened a couple of times to me.
#6

It has the large cans, a bit karger than the tubes. Like this....

http://www.radiomuseum.org/r/rca_rc1001c_35x.html

Paul

Tubetalk1
#7

Tried the metal tubes, I think may be the tuning condenser. Blew out some crud, TV tuner cleaner a shot or 2. See how it plays tomorrow.

Paul

Tubetalk1




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
CT Radio Museum
Hello wjreese, How Cool is that !! I read some history on them and it really sounds like they have nice place and lots...radiorich — 12:27 AM
CT Radio Museum
A great looking museum! Thanks for posting your visit.klondike98 — 11:08 PM
National NC-57 case
I have some of that so I’ll try it. That works great on my Philcos. This radio was a gift from a friend of mine so I’m ...bridkarl — 05:54 PM
National NC-57 case
As far as the cabinet condition, try cleaning it with Goop (non-pumice) hand cleaner and 0000 steel wool. GENTLY! You'l...GarySP — 05:35 PM
National NC-57 case
Yea. I think a repaint is order.  I probably have a spare bandswitch knob somewhere. Since this is an AA-5 type desig...bridkarl — 05:27 PM
Philco model 512
The one I restored had an RCA 100 speaker, the big cast iron one that produced sound from both front and back.RodB — 09:35 AM
National NC-57 case
Not only is the paint chipped out but it has dent that will need to be pushed, or pounded out. The set must have been dr...Arran — 05:09 AM
Philco model 512
There was a 511, (or an updated 1929 model 65 version) Spanish Brown, model in my region, and even though it had obvious...Arran — 06:25 PM
370 Norman Bel Geddes trim pieces
One method that some have used is to get some hardwood dowel, of the appropriate diameter, and cutting a flat onto one s...Arran — 05:03 PM
National NC-57 case
I’m currently recapping this National NC/57. This has a scratch on the case. I guess I can sand this out and just do a s...bridkarl — 01:29 PM

[-]
Who's Online
There are currently no members online.

>