Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Does anyone know what these are called and where I might get some? The hold the backs on. I bought some about a year ago but I don't remember where.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Renovated Radios used to sell them.
Gregb
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 04-21-2016, 12:20 PM by morzh.)
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Thanks guys.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 457
Threads: 31
Joined: Sep 2009
City: Lapeer
State, Province, Country: MI
They still do, $1.25 each. Joe
Joe
Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Yup. Bought 10 of them.
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
$1.25 each for a fraction of a gram piece of cheap nylon.....dos iz a gut gesheft.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 825
Threads: 113
Joined: Aug 2012
City: The Villages
State, Province, Country: Florida
Well Mike, since I couldn't find them at Walmart, I figured I had no choice!
Eric
The Villages, FL
Member: Philco Phorum, ARF, ARCI & Radiomuseum.org
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Eric
I could almost swear I saw something like it way before I got into the hobby. And more than one time. But hey, they make it to the spec etc etc, so ....we pay 10 bucks for a knob for golly's sake. Bud you have to admit, it's a good return on material's cost
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
I don't think anyone is getting rich making knobs or those metal Trimounts. Unfortunately those are all low demand products and can't be mass manufactured like the old days. I've seen the process for making knobs and it is neither cheap or easy, plus the molds have a limited life before they have to be remade.
Buy a mold kit for $50 or $60 (plus dyes) and when your first few knobs come out the wrong color or with bubbles on the surface those $10 knobs don't look so bad anymore. Same way with those Trimounts, buy the material to make them, cut or stamp them out and when you figure out your time is worth more than spending an afternoon trying to make a half dozen that look like crap, then $1.25 doesn't look so bad anymore.
We're just lucky someone is taking the time to make this stuff for us. Since Larry Bordernero passed (Old-Time Replications) we've lost the source for many of the large Philco escutcheons unless someone takes on the task of making them again.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
Thank you John! You worded that so much better than what I was thinking.
Thank goodness the folks are around that take the time and make the effort to do these reproductions for our very limited market. I am in manufacturing and know what costs are involved and we as a hobby should be jumping for joy that these repo items are even available and at the extremely LOW prices as well.
Sorry for the folks that think these things are priced high, THEY ARE NOT.
Gregb
Posts: 496
Threads: 15
Joined: Mar 2013
City: Weymouth Ma
Possibly a small split rivet could be used if one spread it open a little bit.
Henry
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
40-150 General questions
|
Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
Who's Online
|
There are currently 2787 online users. [Complete List] » 3 Member(s) | 2784 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|