1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Cabinet Restoration
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Threaded Mode
Philco 38 cathedral
kiwi_steve
A Kiwi, called Steve
***
Posts: 134
Threads: 11
Joined: Jul 2015
City: Christchurch, New Zealand
#1

04-26-2016, 09:45 PM
Well, not so long ago I managed to buy this:

[Image: http://i241.photobucket.com/albums/ff222...omdzts.jpg]

And because yellow is not one of the many miriad of shades of brown these typically left the factory with I thought I would strip it back in prep for applying a more suitable shade...  but alas, the paint was hiding a sad story...

[Image: http://i241.photobucket.com/albums/ff222...rhlqwg.jpg]

So what to do about this?  It looks like its had an impact, cracked here at the end of the rear brace and also near the top on the other side.  It appears to have been drilled and doweled then glued and filled and then sanded smooth(ish) and painted with a mixture of mustard and glue.

My first thought was to veneer over the top - but I don't really know how to go about that.

Any ideas?

Cheers

Steve
There are no personal problems that can't be overcome with the liberal application of high explosives
Find
« Next Oldest | Next Newest »




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Cabinet Restoration