Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Where does
#1

the 41-300 fit into the 1941 lineup of sets? Short of having a bol and a mystery control is it the top of line? I really like the curvy speaker grille.

Terry


Attached Files Image(s)
   
#2

well I don`t like it   too darn heavy Icon_e_wink

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

Speakin' from experience, eh?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#4

I think that is a spectacular design and would love to add one to my collection. I am sure it is a lite weight compared to some of the 20's consoles I have.

Gregb
#5

+1
I find a lot of the 20's consoles quite plain or really gawady but all weigh a ton.

Terry
#6

Thats really nice!
I am betting by the call station tabs that is is from the Washington area Icon_wink

It looks much better in the light of day then in my den hidden..
Next is to come and get your house organized Icon_smile

Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

Terry

In the initial 1941 Philco model year lineup, the 41-300 is second from the top of the line 41-316 which has wireless remote control. The 300 has more tubes in the audio section, though, making it (arguably) the better radio overall.

You don't know how tempted I was to sneak that big honkin' set into my Excursion! Icon_wink But it was already pretty well packed...plus I'm trying to cut back on big consoles around here, not add more...

--
Ron Ramirez
Ferdinand IN
#8

if I known you liked it I would had fit it in their Icon_thumbup

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#9

(05-16-2016, 08:08 AM)Ron Ramirez Wrote:  Terry

In the initial 1941 Philco model year lineup, the 41-300 is second from the top of the line 41-316 which has wireless remote control. The 300 has more tubes in the audio section, though, making it (arguably) the better radio overall.

You don't know how tempted I was to sneak that big honkin' set into my Excursion! Icon_wink But it was already pretty well packed...plus I'm trying to cut back on big consoles around here, not add more...
> how tempted I was to sneak
That's like trying to sneak out of a car dealership with an Excursion under your overcoat. [Image: http://philcoradio.com/phorum/images/smi...prised.gif]It's a hard set to hide. I felt a little bad cause I knew you where sort of looking for one but Kirk and I had been trying to get this down to me since last fall. Sam was giving me the evil eye [Image: http://philcoradio.com/phorum/images/smi...wisted.gif]because I had forgotten that it was coming us back here along with a fair amount other big and or heavy stuff that didn't sell. Heard you did pretty good with the pushbutton set at the end of the table.[Image: http://philcoradio.com/phorum/images/smi...humbup.gif]

Terry
#10

(05-16-2016, 11:09 AM)Radioroslyn Wrote:  > how tempted I was to sneak
That's like trying to sneak out of a car dealership with an Excursion under your overcoat.

Icon_lol Good one! Icon_lol Icon_thumbup

Quote:I felt a little bad cause I knew you where sort of looking for one but Kirk and I had been trying to get this down to me since last fall.

Oh, H**l, don't feel bad, Terry. Icon_smile I do admire those big 1941 Philcos but I have to limit myself, console-wise, these days.

Quote:Heard you did pretty good with the pushbutton set at the end of the table.[Image: http://philcoradio.com/phorum/images/smi...humbup.gif]

At first I didn't know what you were referring to...what pushbutton set?...and then it dawned on me what you meant. Thank you, Terry...you helped make it happen! Icon_thumbup

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4206 online users. [Complete List]
» 1 Member(s) | 4205 Guest(s)
Avatar

>