Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

16B cathedral side switch
#1

In the cabinet Kirk had just recently finished for me there is no hole in the veneer on the right side for the switch. (Kirk you didn't patch it up, did you? Icon_smile ) I do mot see any patch job at the location.
But the hole in the frame is there.

Wre there discrepancies between various versions of 16B cathedrals?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#2

There is no hole because, someone veneered over it. I don't think Philco ever ran the grain up and over on a "Clyde Shuler" style cabinet, at least, I never saw one. But, I've not seen all the cabinets Philco made so, I could be wrong. Now, they did make some 70 and 90 cabinets with up and over grain.

Steve 

M R Radios   C M Tubes
#3

Steve

As I am not proficient with woodworking or its terminology, could you explain what "up and over grain" means?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#4

Mike, I'm saying the grain is running the wrong direction.

Steve

M R Radios   C M Tubes
#5

Steve is correct - I've never seen the grain running from side to side ("up and over") on a Clyde Shuler cathedral cabinet, only front to back. Model 20, 21, and some early production 70 and 90 cathedrals have the grain running up and over...but later 70 and 90 cathedrals, and all of the later ones as far as I know, have the grain running front to back.

--
Ron Ramirez
Ferdinand IN
#6

Oh...so you guys are talking of the very cabinet I have?

Kirk, this feeling of guilt will pursue you the rest of your life Icon_lol

Gee...I only wanted to know if there should be a hole in the veneer and now.....Icon_lol

He who asketh many a question receiveth many an answer Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

(05-22-2016, 10:29 AM)morzh Wrote:  ......Gee...I only wanted to know if there should be a hole in the veneer and now.....Icon_lol  .....

Can you see traces of a hole on the inside of the cabinet where you'd expect the switch to be?  Did you say you bought John Hagman's model 16 cathedral at Kutztown?

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#8

John

If by traces you mean a hole in the frame, which is what I wrote in #1, it is there. On the veneer in fact there are no signs of the hole, so if it was reskinned it was a large piece.
The opposite side of the cabinet had dome damage Kirk repaired but that was not the hole.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#9

I didn't realize what you meant when you said "frame", but if the hole is on the inside and not the outside it's time to do a little drilling.  

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#10

Here is a picture of one with the switch, but the grain is running front to back.
http://kansascity.craigslist.org/atq/5597970260.html
#11

Mike
Thanks, I actually have a complete one restored by John "Hagstar" Hagman, that I just bought off him in Kutztown.

Has the switch and all.

I was must wondering why? And now I imagine the chassis I have has some mod that eliminates the switch.
Oh well....

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

              OK,,,Can you'all ,,enlighten me about thee switch,,,what is it used for ????
#13

Ken

Well this is a cool one too!

It allows, if turned on, activate the feature of turning sound off if the signal is below a set level (byba certain pot). So when tuning between station thers is mo static etc.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#14

  Thank You,,for your reply,,,,,,very interesting




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1949 Motorola 5A9M
Thx Arran, I will check the antenna connections. Right now the loop is alligator clip connected to the chassis since you...klondike98 — 03:58 AM
1949 Motorola 5A9M
Bob; I was just thinking that maybe the 1R5 tube doesn't like being operated at 1.2 volts on the filament, though you...Arran — 12:56 AM
Philco J1720 stereo and record player with reverb
So I just purchased a Philco J1720 stereo and record player. That has some static when turning the knobs. Wanted to see ...PhilcoJ1720 — 12:26 AM
1949 Motorola 5A9M
I've started looking into the very weak and garbled reception in the set (I have the HS-62A version of the chassis seen ...klondike98 — 12:00 AM
A Marconi model 86
Those last photos were not very good,so I  used one of my other cameras. This is more like the true colors of the radio....Dan Walker — 10:48 PM
Philco 42-345 Restoration/Repair
If you look closely at the paper wax capacitors they probably have something like "outside foil" near the blac...RodB — 10:41 PM
A Marconi model 86
Hello Dan, That really turned out very nice and I also like that color it is not to dark . I Have General Electric m...radiorich — 08:50 PM
Table radio 51C or 52C?
The model 51 and 52 are identical mechanically, I'm not sure what may have been changed between the two chassis but one ...Arran — 08:18 PM
A Marconi model 86
Well today I  installed the grill cloth board and the speaker.  The speaker must weigh 20 pounds by itself. I put the c...Dan Walker — 08:10 PM
Unidentified Philco Bakelite
It's a British Philco, likely from the early 1950s. It has a very common layout for British sets starting in the post wa...Arran — 08:02 PM

[-]
Who's Online
There are currently no members online.

>