Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
On my two portables the knobs are shrinking and was wondering if they are the same as the table/console in the '40s?? They look a bit smaller but they are tenite. I don't have many 1939-42 sets.
Terry
(This post was last modified: 06-04-2016, 01:55 PM by Radioroslyn.)
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
wonder if clear coating would stop it from shrinking same with grill ?
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
I kinda doubt it. I'm thinking it more of a chemical reaction within the tenite itself rather than being exposed to the environment. But what do I know!!!
Terry
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
No there is no way to stop them from warping besides being protected from direct sun for the last 70 years which only really aided in the chemical reaction.
Which knobs?? The ones with the arrows on them?
me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Unfortunately, those knobs are unique to 1941-42 Philco portables; the AC and AC/DC models (non-portables) did not use them.
--
Ron Ramirez
Ferdinand IN
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Looks like you got two off/on/volume knobs and one tuning. All mine look like your tuning knob. May RR can make some replacements.
>missing doors ?????
Terry
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
terry
here are some expensive knobs. but hey if you need them
http://www.ebay.com/itm/PHILCO-RADIO-KNO...SwSclXMIz0
kirk have some ?
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I have one of them. I gave you the other 4 Sam...
If you send me the good knob I will copy it. It should not be that hard and I can try swirling it..
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
(06-06-2016, 12:34 PM)sam Wrote: terry
here are some expensive knobs. but hey if you need them
http://www.ebay.com/itm/PHILCO-RADIO-KNO...SwSclXMIz0
kirk have some ?
Those are for the '40s table/console sets. As RR sez the portable are different. The portable knobs have an extension on the back as the shafts on the set don't stick out far and don't have that pointer design on the front.
Txn
Terry
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Terry
Good Catch I not notice it
Kirk
what would the cost be I don't think a lot
Of pepole have portables to off set the cost
Sam
Ps Kirk you did not give me any knobs ?
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I have the rubber and the plastic to make about 20 of them so there is no cost. If I dont use it then it will expire..
I gave you those knobs over a year ago.. Dont tell me you lost them....
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Hmm
I don't recall you giving me any
But then again I didn't remember the
38-3 in storage from you either
I will send one to you
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
terry
look at knobs again they are both different
one dose not have arrow on top but both have pointer on side
kirk
how are you going to made D slot in back ?
will they be ruined ?
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
The portable knobs you have are one tuning knob (it doesn't have that sharp pointie pointer) and two volume control/ bandswitch (if you have a 42-854 as it has SW band). If KL is going to make a few it's simple enough to file off that pointer.
Terry
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Philco 16B Parts
|
Thanks for the reply. Unfortunately the radio was removed before bidding was over so I didn't get a chance to bid.dconant — 04:10 PM |
Philco 16B Parts
|
Hi Dan,
Mike is correct, there's a lot of painted stuff on the chassis but it looks pretty good. The sm is all there,sp...Radioroslyn — 03:50 PM |
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
Hi Cap'n Clock,
Unfortunately, I do not have this radio. This is a shame because this should be a good performer. 2A...captainclock1988 — 03:43 PM |
Philco 42-390, code 121 speaker
|
Using a 5W 1.5k ceramic resistor in place of the field coil and using a 4 ohm PM speaker, I was able to bring the radi...Stevelog — 02:57 PM |
Philco 60 Squealing
|
I have taken out the 2nd IF and found a problem or not. I believe the coils are litz wire. There is a very small strand ...dconant — 02:13 PM |
Philco 6K7
|
I am restoring a Philco 37-60. The am reception is very good, but the shortwave is very weak. Run 6 Philco removes the g...bobbyd1200 — 01:35 PM |
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
Hi Cap'n Clock,
Unfortunately, I do not have this radio. This is a shame because this should be a good performer. 2A5...MrFixr55 — 06:48 AM |
American Bosch Model 802 auto radio
|
I think it would come under either American Bosch or United American Bosch. American Bosch made sets for the American We...Arran — 05:53 AM |
trying to identify this wire type
|
Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM |
trying to identify this wire type
|
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM |
Who's Online
|
There are currently 6281 online users. [Complete List] » 3 Member(s) | 6278 Guest(s)
|
|
|
|