Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
On my two portables the knobs are shrinking and was wondering if they are the same as the table/console in the '40s?? They look a bit smaller but they are tenite. I don't have many 1939-42 sets.
Terry
(This post was last modified: 06-04-2016, 01:55 PM by Radioroslyn.)
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
wonder if clear coating would stop it from shrinking same with grill ?
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
I kinda doubt it. I'm thinking it more of a chemical reaction within the tenite itself rather than being exposed to the environment. But what do I know!!!
Terry
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
No there is no way to stop them from warping besides being protected from direct sun for the last 70 years which only really aided in the chemical reaction.
Which knobs?? The ones with the arrows on them?
me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Unfortunately, those knobs are unique to 1941-42 Philco portables; the AC and AC/DC models (non-portables) did not use them.
--
Ron Ramirez
Ferdinand IN
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
Looks like you got two off/on/volume knobs and one tuning. All mine look like your tuning knob. May RR can make some replacements.
>missing doors ?????
Terry
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
terry
here are some expensive knobs. but hey if you need them
http://www.ebay.com/itm/PHILCO-RADIO-KNO...SwSclXMIz0
kirk have some ?
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I have one of them. I gave you the other 4 Sam...
If you send me the good knob I will copy it. It should not be that hard and I can try swirling it..
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
(06-06-2016, 12:34 PM)sam Wrote: terry
here are some expensive knobs. but hey if you need them
http://www.ebay.com/itm/PHILCO-RADIO-KNO...SwSclXMIz0
kirk have some ?
Those are for the '40s table/console sets. As RR sez the portable are different. The portable knobs have an extension on the back as the shafts on the set don't stick out far and don't have that pointer design on the front.
Txn
Terry
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Terry
Good Catch I not notice it
Kirk
what would the cost be I don't think a lot
Of pepole have portables to off set the cost
Sam
Ps Kirk you did not give me any knobs ?
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I have the rubber and the plastic to make about 20 of them so there is no cost. If I dont use it then it will expire..
I gave you those knobs over a year ago.. Dont tell me you lost them....
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Hmm
I don't recall you giving me any
But then again I didn't remember the
38-3 in storage from you either
I will send one to you
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
terry
look at knobs again they are both different
one dose not have arrow on top but both have pointer on side
kirk
how are you going to made D slot in back ?
will they be ruined ?
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
The portable knobs you have are one tuning knob (it doesn't have that sharp pointie pointer) and two volume control/ bandswitch (if you have a 42-854 as it has SW band). If KL is going to make a few it's simple enough to file off that pointer.
Terry
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Two small radios from France. Restoration and review.
|
Greetings;
I think that it's possible that the assortment of components was the result of post war parts shortages, a...Arran — 12:18 PM |
Philco model 38 code 121 not receiving signal.
|
Unfortunately I can't inject any audio into the volume control. It is in the primary circuit of the antenna coil, not in...Stormlord5500 — 09:32 AM |
Philco model 38 code 121 not receiving signal.
|
Sounds good Gary I'll do that. I have plenty of stuff like that I can scrounge up. I am still kind of new to all this so...Stormlord5500 — 08:47 AM |
Philco Battery-WWII vintage
|
Seems to me that this a general purpose or radio filament 6V battery of very high amp-hour capacity and very high "...MrFixr55 — 08:08 AM |
Testing a speaker and output transformer Trutone A2-G
|
Hi Morzh,
From my end, no. I did not know that there are 2 threads on this topic. Maybe it should be combined.MrFixr55 — 07:13 AM |
Testing a speaker and output transformer Trutone A2-G
|
Any reason for the 2nd copy of the thread?morzh — 10:22 PM |
Testing a speaker and output transformer Trutone A2-G
|
Sorry Murf, technical is what I do.
OK, Unlike the Western Auto Tru-Tones, this True Tone is a Wells Gardner set. Th...MrFixr55 — 09:31 PM |
Philco model 38 code 121 not receiving signal.
|
You should be able to inject an audio signal such as from a CD or mP3into the radio at the volume control. The set will...MrFixr55 — 08:14 PM |
Testin a speaker and output transformer Trutone A2-G
|
Hey Murf, this shouldn't be too difficult if it happens all the time. I'm assuming this is the 1938 Wells Gardner A2 wit...RodB — 05:46 PM |
Testing a speaker and output transformer Trutone A2-G
|
Hello guy's,
Have a Trutone A2-G teledial floor model radio that I am having issues with.
Suspecting maybe speaker or ...murf — 03:25 PM |
Who's Online
|
There are currently 560 online users. [Complete List] » 1 Member(s) | 559 Guest(s)
|
|
|

|