Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
On my two portables the knobs are shrinking and was wondering if they are the same as the table/console in the '40s?? They look a bit smaller but they are tenite. I don't have many 1939-42 sets.
Terry
(This post was last modified: 06-04-2016, 01:55 PM by Radioroslyn.)
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
wonder if clear coating would stop it from shrinking same with grill ?
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
I kinda doubt it. I'm thinking it more of a chemical reaction within the tenite itself rather than being exposed to the environment. But what do I know!!!
Terry
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
No there is no way to stop them from warping besides being protected from direct sun for the last 70 years which only really aided in the chemical reaction.
Which knobs?? The ones with the arrows on them?
me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Unfortunately, those knobs are unique to 1941-42 Philco portables; the AC and AC/DC models (non-portables) did not use them.
--
Ron Ramirez
Ferdinand IN
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Looks like you got two off/on/volume knobs and one tuning. All mine look like your tuning knob. May RR can make some replacements.
>missing doors ?????
Terry
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
terry
here are some expensive knobs. but hey if you need them
http://www.ebay.com/itm/PHILCO-RADIO-KNO...SwSclXMIz0
kirk have some ?
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I have one of them. I gave you the other 4 Sam...
If you send me the good knob I will copy it. It should not be that hard and I can try swirling it..
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
(06-06-2016, 12:34 PM)sam Wrote: terry
here are some expensive knobs. but hey if you need them
http://www.ebay.com/itm/PHILCO-RADIO-KNO...SwSclXMIz0
kirk have some ?
Those are for the '40s table/console sets. As RR sez the portable are different. The portable knobs have an extension on the back as the shafts on the set don't stick out far and don't have that pointer design on the front.
Txn
Terry
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Terry
Good Catch I not notice it
Kirk
what would the cost be I don't think a lot
Of pepole have portables to off set the cost
Sam
Ps Kirk you did not give me any knobs ?
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I have the rubber and the plastic to make about 20 of them so there is no cost. If I dont use it then it will expire..
I gave you those knobs over a year ago.. Dont tell me you lost them....
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Hmm
I don't recall you giving me any
But then again I didn't remember the
38-3 in storage from you either
I will send one to you
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
terry
look at knobs again they are both different
one dose not have arrow on top but both have pointer on side
kirk
how are you going to made D slot in back ?
will they be ruined ?
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
The portable knobs you have are one tuning knob (it doesn't have that sharp pointie pointer) and two volume control/ bandswitch (if you have a 42-854 as it has SW band). If KL is going to make a few it's simple enough to file off that pointer.
Terry
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
An attempt to remove the Field Coil from a G speaker
|
Hi Morzh,
May be a good idea to remove the cone to prevent damage. You may have to do so anyway to remove the pole ...MrFixr55 — 08:44 PM |
Philco 91 Restore Code ??
|
I think that Danaher, the company that owns Beckman-Coulter (the company that I worked for 41 years) owns Fluke. They a...MrFixr55 — 08:35 PM |
Philco 91 Restore Code ??
|
Rod
I wish... :lol:
I am not sure I'd buy the Fluke, had it not fell in my lap for free. $500 to $800...it's a lot...morzh — 08:09 PM |
Philco 91 Restore Code ??
|
Mike, ...you get a commission?RodB — 07:52 PM |
New member
|
Hi. I specialize in refurbishing Predictas, but I'm in Chicago. If you can get it to me, I'd be happy to go over it. ...Bob Andersen — 06:43 PM |
An attempt to remove the Field Coil from a G speaker
|
I have 3 G speaker, all with open Field coils.
Today I pull one of the shelf and decided to try to remove the FC (spo...morzh — 06:07 PM |
Philco 91 Restore Code ??
|
Thanks Mike. I will check them out.dconant — 05:52 PM |
Philco 91 Restore Code ??
|
There is no such thing as bad Fluke.
This said, they are expensive. A Fluke is easily 10x the price of comparable CCC...morzh — 05:45 PM |
Philco 91 Restore Code ??
|
Hello Mike,
Yes, I have 3 Fluke meters one being my first Fluke 77 and other being Fluke 87.
My third is Fluke clamp -...radiorich — 05:04 PM |
Philco 91 Restore Code ??
|
I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM |
Who's Online
|
There are currently no members online. |
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|