Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
After two years my 118 is done. Came out pretty good. Original grille cloth. It plays very nicely. Someone had modified the set to work with a loop antenna. Fortunately, the antenna coil was still there, just disconnected.
[Image: http://i614.photobucket.com/albums/tt228...bd9f54.jpg]
Steve Chambers
(This post was last modified: 06-12-2016, 04:03 PM by Steve Chambers.)
Posts: 1,886
Threads: 214
Joined: May 2015
City: Seattle
State, Province, Country: WA
I see only one image - it looks like maybe there were others?
But whatever - I can see you did a beautiful job! 
Posts: 85
Threads: 13
Joined: Jul 2015
City: Rockville, MD
Beautiful job! I have one of those around here somewhere to get to some day. Hope there's no faux finish on it anywhere. Ed
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
Thanks!
All real wood on this one.
Steve Chambers
(This post was last modified: 06-12-2016, 04:01 PM by Steve Chambers.)
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
(06-12-2016, 03:45 PM)Nathan Slingerland Wrote: I see only one image - it looks like maybe there were others?
But whatever - I can see you did a beautiful job!
Only one. I don't know how that other stuff got in there or how to remove it.
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Great job.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Congratulations ! It looks great.
Posts: 3,148
Threads: 55
Joined: Apr 2011
City: Lexington, KY
That turned out beautiful
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 5,129
Threads: 271
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
...I still only see one image...
But hey, Steve, congratulations on a great job!
--
Ron Ramirez
Ferdinand IN
Posts: 77
Threads: 24
Joined: Nov 2010
City: Oradell, NJ
06-16-2016, 03:27 PM
(06-12-2016, 03:37 PM)Steve Chambers Wrote: Someone had modified the set to work with a loop antenna. Fortunately, the antenna coil was still there, just disconnected.
I've been guilty of doing that,  but I leave the antenna coil for a subsequent owner to restore it later if they want to, just like with your radio. I sometimes use a ferrite rod hidden inside.
Posts: 157
Threads: 12
Joined: Dec 2012
City: Seattle, WA
Beautiful! High on my list of Philcos to have, kinda surprised it's eluded me so long. But, here's to hoping!
Users browsing this thread: 3 Guest(s)
|
|
Recent Posts
|
|
Philco 91 Restore Code ??
|
| Can someone tell me if my 42 tubes are connected triode or pentode in fixed or cathode bias? How could I tell by looking...dconant — 10:47 AM |
|
Philco 40-120C Restoration
|
| Hello David,
that is great news about the tubes source being local !
Sounds like you got good start on the radio .
...radiorich — 09:41 AM |
|
An attempt to remove the Field Coil from a G speaker
|
| Mike;
I've only run into a speaker with an open filed coil twice, and they were on newer speakers from the 1940s. One ...Arran — 12:48 AM |
|
An attempt to remove the Field Coil from a G speaker
|
| Arran
Yes, this is my plan for now and what do I got to lose, this is not even the speaker from this radio, but one o...morzh — 10:44 PM |
|
An attempt to remove the Field Coil from a G speaker
|
| Mike;
I would unwrap the field coil, and see if maybe there a break near one of the ends, like where the coil wire att...Arran — 10:23 PM |
|
An attempt to remove the Field Coil from a G speaker
|
| ...and this is what I did. I fed a little LT into the screwholes with a small brush, and a little on the rim next to the...morzh — 09:52 PM |
|
Philco 40-120C Restoration
|
| I combined the two 40-120C threads together as we like to keep the discussion of the same radio together. It helps with...klondike98 — 09:36 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| Just checked were I buy tubes price is four dollars. So living in Florid we have a local source for tubes. David David — 09:14 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| The higher voltage may be due to higher mains voltage. My mains run 120-125AC when the set was new mains would be 110-11...David — 09:09 PM |
|
Philco 40-120C Weak, Distorted Ouput
|
| Thank you for your reply. I pulled a speaker from a Philco 41-221 and received the same result. I used a signal tracer t...bluecap — 08:45 PM |
|
Who's Online
|
There are currently 4304 online users. [Complete List]
» 1 Member(s) | 4303 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
