Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Imperial Radio
#1

Hello
I was given an Imperial radio. It has no Model ID on it. It has 6 tubes. One 6A7, one 6D6, one 75, two 42's and one 80. It has two tuning knobs, one for AM and one for SW. A knob to switch from AM to SW. A knob for on/off and volume. So I am looking for help in finding a schematic. I am unable to post pictures because my picture files are too large. They are over the 500kb limit.

Thanks Bob 


Attached Files Image(s)
           
#2

Here's some info on one way to resize photos, there are many image programs you can use to do it.

http://philcoradio.com/phorum/showthread...2#pid35972
#3

 It could be a private label radio made by Belmont, Wells Gardner, or one of the other independents for a store chain. Alternatively it may be a foreign made set, American style tubes were commonly used in many places around the world in the 1930s, 40s, and 50s, such as in Italy, Australia/New Zealand, and even in France. It would be helpful to see some pictures, a chassis layout can tell you a lot about who made a set.
Regards
Arran
#4

(09-21-2016, 10:00 PM)klondike98 Wrote:  Here's some info on one way to resize photos, there are many image programs you can use to do it.

http://philcoradio.com/phorum/showthread...2#pid35972

Thank You Bob
I used Paint it worked great.
Bob
#5

What is on the back?
No metal tag? Maybe a red one or a CX serial number?

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

Chassis is the same as an Imperial 694
The pictures below are a Monarch with the same chassis....


http://www.radiomuseum.org/r/imperial2_694.html


Attached Files Image(s)
       

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

 My guess would be that these "Imperial" radios were either made by Belmont or Sentinel so I would have a look under either of those makes, under the 1935-37 model years.
Regards
Arran
#8

(09-22-2016, 09:36 PM)OldRestorer Wrote:  What is on the back?
No metal tag? Maybe a red one or a CX serial number?

Kirk

Only tag is the Imperial on front of radio. Nothing on the chassis either.
Bob
#9

(09-22-2016, 09:39 PM)OldRestorer Wrote:  Chassis is the same as an Imperial 694
The pictures below are a Monarch with the same chassis....


http://www.radiomuseum.org/r/imperial2_694.html

Thanks. It sure looks right. I'll check the Web site out.
#10

(09-23-2016, 03:53 AM)Arran Wrote:   My guess would be that these "Imperial" radios were either made by Belmont or Sentinel so I would have a look under either of those makes, under the 1935-37 model years.
Regards
Arran

Thanks. I'll do that. I'll post what I find.
Bob




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum! :wave: Here's the schematic for that radio from our digital library: Any electrolytic ca...klondike98 — 08:05 PM
Philco Model 38-7: what caps & resistors do fail typically?
Hi all, on vacation in Montreal,  a friend of mine showed me a Philco Model 38-7 console radio from the 30ies. Mechan...Musaeum — 07:21 PM
Part numbers to model cross
I looked thru the documents and did not see one. Might have missed it though.Jim Dutridge — 07:16 PM
Philco 42-345 Restoration/Repair
Please tell me this was it, I replaced resistor 27 and it's playing on the broadcast band. I am afraid to change the ban...osanders0311 — 06:12 PM
Philco 42-345 Restoration/Repair
So far still no broadcast, I am posting pictures of #14 Oscillator and also a resistor #27 which connects to an XXL tube...osanders0311 — 04:02 PM
Part numbers to model cross
I believe there is that document, and I think we might have it in the Library.morzh — 03:29 PM
Philco 42-345 Restoration/Repair
Ok MrFixr55,  I have tried the DeoxIT D5 on the band switch and even though it has relieved the tension I felt when turn...osanders0311 — 11:11 AM
Part numbers to model cross
Is there a reference somewhere where you can punch in Philco part numbers and see what models those parts were used in?Jim Dutridge — 10:17 AM
Philco 42-345 Restoration/Repair
Hi OSanders, Look carefully at the band switch. Turn it slowly and "wiggle" it around the desired band. ...MrFixr55 — 12:33 AM
5U4 vs 5Z4 tubes
I think that RCA and GE introduced metal tubes in the USA in 1936.  I don't know if they were being made by RCA, GE or b...MrFixr55 — 11:20 PM

[-]
Who's Online
There are currently 1279 online users. [Complete List]
» 2 Member(s) | 1277 Guest(s)
AvatarAvatar

>