Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Imperial Radio
#1

Hello
I was given an Imperial radio. It has no Model ID on it. It has 6 tubes. One 6A7, one 6D6, one 75, two 42's and one 80. It has two tuning knobs, one for AM and one for SW. A knob to switch from AM to SW. A knob for on/off and volume. So I am looking for help in finding a schematic. I am unable to post pictures because my picture files are too large. They are over the 500kb limit.

Thanks Bob 


Attached Files Image(s)
           
#2

Here's some info on one way to resize photos, there are many image programs you can use to do it.

http://philcoradio.com/phorum/showthread...2#pid35972
#3

 It could be a private label radio made by Belmont, Wells Gardner, or one of the other independents for a store chain. Alternatively it may be a foreign made set, American style tubes were commonly used in many places around the world in the 1930s, 40s, and 50s, such as in Italy, Australia/New Zealand, and even in France. It would be helpful to see some pictures, a chassis layout can tell you a lot about who made a set.
Regards
Arran
#4

(09-21-2016, 10:00 PM)klondike98 Wrote:  Here's some info on one way to resize photos, there are many image programs you can use to do it.

http://philcoradio.com/phorum/showthread...2#pid35972

Thank You Bob
I used Paint it worked great.
Bob
#5

What is on the back?
No metal tag? Maybe a red one or a CX serial number?

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

Chassis is the same as an Imperial 694
The pictures below are a Monarch with the same chassis....


http://www.radiomuseum.org/r/imperial2_694.html


Attached Files Image(s)
       

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

 My guess would be that these "Imperial" radios were either made by Belmont or Sentinel so I would have a look under either of those makes, under the 1935-37 model years.
Regards
Arran
#8

(09-22-2016, 09:36 PM)OldRestorer Wrote:  What is on the back?
No metal tag? Maybe a red one or a CX serial number?

Kirk

Only tag is the Imperial on front of radio. Nothing on the chassis either.
Bob
#9

(09-22-2016, 09:39 PM)OldRestorer Wrote:  Chassis is the same as an Imperial 694
The pictures below are a Monarch with the same chassis....


http://www.radiomuseum.org/r/imperial2_694.html

Thanks. It sure looks right. I'll check the Web site out.
#10

(09-23-2016, 03:53 AM)Arran Wrote:   My guess would be that these "Imperial" radios were either made by Belmont or Sentinel so I would have a look under either of those makes, under the 1935-37 model years.
Regards
Arran

Thanks. I'll do that. I'll post what I find.
Bob




Users browsing this thread:
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently 2308 online users. [Complete List]
» 1 Member(s) | 2307 Guest(s)
Avatar

>