Cannot catch a break: now an Ortofon pickup.
Posts: 15,797
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
Last weekend I received an Ortofon pickup for my turntable. Claimed to be NOS, from Denmark (not many of them, in fact the only person who was selling it.
Today put it in my Technics. It is a T4P cartridge so it is a snap to do.
Sounds really great. I was about to leave the feedback but something stopped me. I thought the sound was asymnetric. I was playing an organ piece so the difference between the channels is not huge.
I listened to the right channel - there it was...nothing.
Put ZZ TOP sure enough, it became obvious right away.
Tried cables, nothing.
Put the old cartridge (a Stanton) back - both channels are fine.
So....return initiated to Denmark.
Ay carramba.
And it is so sad, the record of the organ really sounded wonderful.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Ok silly question
How will a needle know the difrance of left and right
Sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 15,797
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
It is a flex square frame, moving the magnet in different directions, and the record is also polarised.
https://en.m.wikipedia.org/wiki/Magnetic...tridge.jpg
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 11-25-2016, 08:51 PM by morzh.)
Posts: 15,797
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
Update
PS. Decided to install the cartridge again. Hmmmm.....shows open at the cable's end on the right. With the Stanton shows both channels at 500 ohm.
Bad socket spring in tonearm?
PPS. Yes. Stanton is reliably connected and the Ortofon's right is not.
I even see the reason. The Ortofon's pins are tapered or coned. Very slightly. But the coning starts at the middle of the pins and so the end diameter is just a little smaller. And for one of the contacts that is enough.
The Stanton was bought together with the turntable and I never touched it so there was no mating cycles.
I tried pressing upon the contacts...they have no leeway.
Not sure what to do. Don't want to screw the tonearm so my Stanton does not work either.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 15,797
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
Well...under impression there was a problem with tonearm connector I tried some tricks, to no avail.
Eventually, frustrated, I measured the resistance on the cartridge again.
Well...sad news. It is an intermittent connection problem.
The left channel reliably shows 700 Ohm whenever probed, but the right one show open, then some kiloohms, then when touched and lightly pressed side to side, 750 ohm, then again open or tens of kiloohms.
I photographed it with my Fluke clipped to right/left channels, showing open or 700 ohms respectively.
Will have to return.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 11-25-2016, 07:36 PM by morzh.)
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Thanks mike
I did not know that
Sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 15,797
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
Well
The seller seems to be a decent fellow, he read what I've done, apologized, said that it is nice to have a customer who knows what he's doing, and offered me another cartridge he was keeping for himself, plus another stylus.
Well, it'll take another 3 weeks but hey, it is in Denmark and the shipping was free.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Users browsing this thread: 3 Guest(s)
|
|
Recent Posts
|
|
Gilfillan Brothers Car Radio?
|
| There is a Mission Bell model 19/19A that could be what you’re looking for, Riders vol 4. It has the tube line-up of: 0Z...Joe Rossi — 05:01 PM |
|
Looking for verification of correct schematic.
|
| Definitely 870044RossH — 01:12 PM |
|
12' Philco
|
| Wonder if the chassis was big too.daveone23 — 12:38 PM |
|
Philco 38-2 Automatic Tuning
|
| Hi Ron, I have sent Radio Daze my concerns with the dial so I guess we will see. They used my original to make the repro...dconant — 12:27 PM |
|
Hickok AC51 tube tester
|
| How does the 5W4 and 83 tube filaments get fed?martinj — 12:25 PM |
|
462ron
|
| Hi Dan, your original dial appears to be lighter, easier to allow light through. My original is similar except it’s crac...462ron — 12:07 PM |
|
Philco 38-2 Automatic Tuning
|
| I received my new 38-2 dial. I'm a little disappointed. As you can see in the picture the blues have a white shadow. The...dconant — 11:13 AM |
|
Philco 38-2 Low Volume
|
| I have been playing my 38-2 for a while now and it is doing very well. I did have to replace the 6A8 (osc) as it develop...dconant — 11:03 AM |
|
Philco Speaker Spider
|
| Hello, Does anyone with a 3 D printer make the spiders for those old Philco speakers? That might be a good idea for some...dconant — 09:41 AM |
|
Philco 16B Parts
|
| Hello, I'm looking to buy a 16B but I'm not so sure of what I am looking at. First as seen from the picture it looks lik...dconant — 09:17 AM |
|
Who's Online
|
There are currently 2682 online users. [Complete List]
» 2 Member(s) | 2680 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
