Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

42-365
#61

lol Icon_lol
I like how you phrased that

Now you know that's not the right answer!!!!!

sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#62

I think 0.6 Ohm is what it should be
#63

Or "less 1 ohm" ?
#64

Or is it "less 0.1 ohm"
#65

I think Sam is referring to the missing punctuantion after "powered off" Icon_smile
Truthfully, took me a while to understand it too Icon_lol

"EXECUTE NOT PARDON". Which one is it? Icon_lol

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#66

I think there is a disconnect. I was just saying the the resistance from pin 7 was measured to be 0.6 Ohms with the radio powered off. Then I was following the line from the pin on the schematic and was thinking that the resistance is written as "less 1 ohm" or possibly it says "less 0.1 Ohm" there.
But I did have a laugh at "Now you know that's not right"
#67

Still not the right answer!
I was looking for something open.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#68

Ha! Ok what's the right answer? That tube should be 70V but its low. We tried disconnecting one end of 17 a week ago but that didn't raise the voltage.
#69

Ok I'll look for something open
#70

Well there isn't anything that isn't supposed to be
#71

(12-08-2016, 10:23 PM)ccbaker13 Wrote:  Well there isn't anything that isn't supposed to be

Well as Peavey the druggist would "I wouldn't say that"! The voltages aren't.
Does #27 measure 4.7K? and what are the voltages on both sides of it.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#72

I get 4.7K and 10 volts across it
#73

Oh sorry, 190V and 200V
#74

Reminds me of chess playing Icon_lol

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#75

Yeah this radio is Bobby Fischer




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently no members online.

>