Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith 6D510
#1

Man oh man this $5.00 buy has turned into a heck of a project..

 I bought this at K-town and started working on it 3 days ago.
First thing I found was all speaker wires cut, next was half the sires to the 1st IF were cut and the can was bent to heck. Then all the rubber wiring was bare already, The ECAP was broken off and wires cut, It was full of poop and dead stink bugs, Next I had an open 1st if even after reattaching the wires. When I fixed the 1st if 40Ga wire the radio would still not play. I spent 3.5 hours on the phone with Terry and he was very patient with me, Icon_lol
I yesterday just for giggles, took apart the 2nd IF and half was open.. I reattached the tiny stranded wire and checked the alignment. I could not get signal at 455 so I spent an hour adjusting the IF cans until I got a signal. Mike and I were going over it and finally got stations. 

 I had taken my night pill so I really dont remember the final conversation, :Icon_lol Icon_lol 
I think Mike hung up on me?  Icon_silent

So now I am going to secure the busted up IF can and do a final alignment outside where there is no interference...


Attached Files Image(s)
                   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

More pics


Attached Files Image(s)
           

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

She lives!!!!
Aligned perfectly to the dial numbers...

Thanks to Mike and Terry

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

Those are Ok sets, like the handle reminds me of a comb type material.

Paul

Tubetalk1
#5

Boy oh boy ur table looks like a real shop now with the signal generator!!!!!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#6

That's the one I paid 5 bucks in Kutztown's auction, Terry, remember, you were there wgen I bought it.

I pretty much reconditioned (reformed) the electrolytic cap, that was it. I have another one.



Kirk,

Now I understand why you were talking like a zombie Icon_lol

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Look at all those alligator clip leads Icon_lol
The difference between up is that I clean the space each time I use it Terry Icon_smile

The sig gen is very helpful but I need a ... Geeze, I cant remember what it is called.....
Ack! My memory stinks...

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

The frequency counter?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.




Users browsing this thread:
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 3977 online users. [Complete List]
» 1 Member(s) | 3976 Guest(s)
Avatar

>