Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 39-12 all restored!
#1

  
  Well I decided to dig in to this Philco close and play record player / radio. The speaker transformer had broken off in shipping and the wires had snapped so I repaired that and it still didn't work. I noticed that the 41 tube was not lit and found a break in the tube from the broken speaker hitting it. Once that was replaced it came to life. I recapped the chassis and put in one of my rebuilt cartridges (SAMS Icon_twisted ). The record is the test record so it doesn't sound very good but she plays real nice and the radio plays exceptionally well with a short antenna...

https://www.dropbox.com/s/p8dvmbfy6ir1v6...2.MOV?dl=0

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

Oh and did you know that early Philco record players had Philco Phonograph labeled caps?
I have never seen one in any Philco record player I restored...

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

I enjoyed your talk, when is your YouTube channel going up! Icon_biggrin

I could have interviewed you as a guest and had some real fun and fine radio talk!

You are a budding Talent.

Paul

Tubetalk1
#4

Nice Job!
#5

I got a Philco 41 RP-2 off ARF and it came today. I tore it down and rebuilt it in 2 or so hours.
Here is her playing through an unfinished radio...

video:
https://www.dropbox.com/s/ez6jmwud1xljqp...6.MOV?dl=0

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

Pretty slick Icon_thumbup

That's the first "close and play record player" I've seen.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#7

Kirk.....Nice job and also a nice little video..Thanks!
#8

That's is real cool Kirk!

Hey are you still growing your own Rochelle Salts for the crystal cartridges?

Mark K8KZ
#9

I had to quit that idea Mark.
It went over $250.00 in costs and it worked zero times.
I found a company that would cut them but it was $5000.00 for 1000 slices. Thats 500 carts if you dont break a single one. I am using Donor carts. I bought a bunch from Gary at VM.
It is a super secret that no one will share for some reason but they are Ronette 500 carts.

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 4117 online users. [Complete List]
» 2 Member(s) | 4115 Guest(s)
AvatarAvatar

>