Posts: 808
Threads: 43
Joined: Dec 2008
City: Chicago, IL
Yes, it uses common Philco knobs so that was no problem
Other than clear coating the top, I haven't touched the cabinet and don't plan to any time soon. I just don't have the room or equipment to do it right. Someday I hope to get an HVLP spray rig and space to handle a cabinet this large - or have someone else do it.
(This post was last modified: 11-28-2014, 05:25 PM by
Bob Andersen.)
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
(11-28-2014, 05:23 PM)Bob Andersen Wrote: Yes, it uses common Philco knobs so that was no problem Other than clear coating the top, I haven't touched the cabinet and don't plan to any time soon. I just don't have the room or equipment to do it right. Someday I hope to get an HVLP spray rig and space to handle a cabinet this large - or have someone else do it.
Yes the top clear finish on the 37 and 38-690's seem to have problems with peeling off. I've seen several that are missing some or most of the lacquer clear coat
Posts: 479
Threads: 73
Joined: Mar 2012
City: Riverside, CA
Nice set Bob. Look forward to one of your great video restorations on this one!
- Geoff
(This post was last modified: 12-09-2014, 02:27 AM by
Geoff.)
Posts: 808
Threads: 43
Joined: Dec 2008
City: Chicago, IL
As some of you may know I recently bought a new house and just finished moving. A lot of my collection is now in a climate controlled storage facility, but some of the best are now in a display room. That includes this 37-690.
I moved all the sets either myself or with the help of a friend. I removed some of the chassis to lighten the load which gave me the opportunity to finally take a closer look inside this beast.
Turned out the removing the lower chassis didn't help as much as we had hoped but taking out the big speaker too sure did.
[Image: https://c1.staticflickr.com/1/741/325049...3b54_c.jpg]
[Image: https://c1.staticflickr.com/4/3827/32504...b6c1_c.jpg]
[Image: https://c1.staticflickr.com/3/2902/32504...74fa_c.jpg]
While disconnecting the tweeters I noted that they both were nuts and showed evidence of having been removed. Also the cable for the one in the upper right butts up next to a tube shield.
Well that got me thinking and I did a little web searching and discovered ever example I could find showed the tweeters with the connections up top - not at the bottom. That leads me to the conclusion that mine are in upside-down!
[Image: https://c1.staticflickr.com/8/7236/69327...403a_c.jpg]
Here's one I found online.
[Image:
http://www.tuberadioland.com/images/phil...ear_9_.jpg]
(This post was last modified: 03-10-2017, 03:14 PM by
Bob Andersen.)
Posts: 808
Threads: 43
Joined: Dec 2008
City: Chicago, IL
Posts: 1,468
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Posts: 71
Threads: 5
Joined: Nov 2005
City: Beaver Falls
State, Province, Country: Pennsylvania
Those Sprague electrolytic capacitors would still be "period correct"; if it were mine, I would restuff them.
Tim KA3JRT
Posts: 613
Threads: 21
Joined: Nov 2014
City: Svalyava
State, Province, Country: UkraineTranskarpatia
Fantastic device ...
It's my dream ...
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
