Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Almost done with 650 H
#1

I'm new to the phorum. Just wanted to say thanks for all the help and answers I was able to
Get from reading all the experiences you all have shared and discussed. Thanks Ron for your
Detailed description on the tuning drive assembly. I really had a time with that D ring wire. This 
Is my first restoration really had fun.
Thanks again Paul
#2

Welcome aboard, Paul! But don't thank me on the dial drive info, thank Richard Hines who supplied the text and photos. I just posted it all on his behalf. Icon_smile

For those curious, the thread in question may be found here.

--
Ron Ramirez
Ferdinand IN
#3

Welcome to the Phorum!
Icon_wave
#4

A photo of my 650 H     
#5

Welcome Paul!

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

Hi Paul and Welcome,
I've got it's big brother.
[Image: http://philcoradio.com/phorum/attachment.php?aid=11710]
Your 650H is nice looking!!!!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

(03-21-2017, 10:56 PM)Radioroslyn Wrote:  Hi Paul and Welcome,
I've got it's big brother.
[Image: http://philcoradio.com/phorum/attachment.php?aid=11710]
Your 650H is nice looking!!!!
  
  Thanks Terry, that's a very nice 660 L (right?) its only the 2nd one I've ever seen.
And thanks for the welcome, Paul
#8

Yup 660L. I've only seen one other too, on the net and I think it's over on the left coast.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#9

Nice 650H! I'd really like to find one of those someday! I really like the lyre design! I have a set of lyre back chairs this Radio would look good with in the same room someday!
If they're rare, though, if I was ambitious enough, I might try to make my own cabinet. Icon_crazy
I do have a 650X unrestored that looks pretty decent. It's an 8-tube if I recall, so it should be pretty decent sounding and a good performer!

Blessings,
Jeff W.
Jonesboro, Arkansas

http://jeffsradios.weebly.com

God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
#10

Here's me 650 MX, that I've had for about 30 years.  Found it in the local paper back then for $50 and restored it, as the finish was too far gone to save.  That is the original speaker cloth! Lucky for me, as reproductions back then, weren't readily available. Seems to be a fairly uncommon model. Love that trap door dial on the 650 series!
[Image: http://www.surfacezero.com/g503/data/500...0_MX_a.JPG]
[Image: http://www.surfacezero.com/g503/data/500...650_MX.JPG]
#11

Very Nice!!!
I was hoping to get busy on refinishing my 660L but the weather this spring/summer/fall was not very conducive to spraying lacquer. Spring is coming!!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
MrFixr Honestly, I haven't done that yet and do not want to screw up the threads; maybe you could do it, or we could...morzh — 12:48 PM
Two small radios from France. Restoration and review.
Greetings; I think that it's possible that the assortment of components was the result of post war parts shortages, a...Arran — 12:18 PM
Philco model 38 code 121 not receiving signal.
Unfortunately I can't inject any audio into the volume control. It is in the primary circuit of the antenna coil, not in...Stormlord5500 — 09:32 AM
Philco model 38 code 121 not receiving signal.
Sounds good Gary I'll do that. I have plenty of stuff like that I can scrounge up. I am still kind of new to all this so...Stormlord5500 — 08:47 AM
Philco Battery-WWII vintage
Seems to me that this a general purpose or radio filament 6V battery of very high amp-hour capacity and very high "...MrFixr55 — 08:08 AM
Testing a speaker and output transformer Trutone A2-G
Hi Morzh, From my end, no. I did not know that there are 2 threads on this topic. Maybe it should be combined.MrFixr55 — 07:13 AM
Testing a speaker and output transformer Trutone A2-G
Any reason for the 2nd copy of the thread?morzh — 10:22 PM
Testing a speaker and output transformer Trutone A2-G
Sorry Murf, technical is what I do. OK, Unlike the Western Auto Tru-Tones, this True Tone is a Wells Gardner set. Th...MrFixr55 — 09:31 PM
Philco model 38 code 121 not receiving signal.
You should be able to inject an audio signal such as from a CD or mP3into the radio at the volume control. The set will...MrFixr55 — 08:14 PM
Testin a speaker and output transformer Trutone A2-G
Hey Murf, this shouldn't be too difficult if it happens all the time. I'm assuming this is the 1938 Wells Gardner A2 wit...RodB — 05:46 PM

[-]
Who's Online
There are currently 547 online users. [Complete List]
» 3 Member(s) | 544 Guest(s)
AvatarAvatarAvatar

>