Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Hallicrafters S-38d
#1

if anyone needs any help gettng a Hallicrafters S-38d runnng, give me a buzz 304 772 3411

I wont ever see this thread again because i am just posting to say i have restored one and got it running very well.

I can..........
give you voltage readings i am getting at test points to compare your radio
send pics of how mine is restored ect.
here is your capacitor list to get all the caps redone including the quad filter cap.


4 section filter cap c14A,B,C,D
20uf       25vdc                    qty need-1 + 1 spare
40uf       150vdc                  qty need-1 + 1 spare
40uf       150vdc                  qty need-1 + 1 spare
60uf       150vdc                  qty need-1 + 1 spare
 
This is the list of random paper caps throughout the remaining schematic
.01uf      200vdc                  qty need-1 + 1 spare
.01uf      600vdc                  qty need-1 + 1 spare
.02uf      600vdc                  qty need-1
.02uf      600vdc                  qty need-1
.02uf      600vdc                  qty need-1 + 1 spare
.05uf      600vdc                  qty need-1 + 1 spare
.05uf      200vdc                  qty need-1 + 1 spare
#2

Scott
Your post will always be here unless you delete 


Sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

10-4, thanks!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3607 online users. [Complete List]
» 2 Member(s) | 3605 Guest(s)
AvatarAvatar

>