Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need help finding a radio
#1

Guys I am looking for a little table radio to put by  my bed. I am interested in a Philco 39-30t. Does anyone have one of these in your collection? And if anyone does have one how are they as performers, and do they pick up stations all across the dial. Hope to find one for my collection. We'll see. Thanks for the information. Icon_wave
#2

Not really a little radio.
A 38-15 is.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Mike is right...it's not a very little radio. If you want one bedside, you'll need a fairly large nightstand, as this radio is 18 inches long by about 11 high and 10 deep. I have one I restored and it is a decent performer (with a long wire antenna) for a 6 tube radio. From a convenience standpoint, you may want to consider a 40-150 or 40-155 instead. They are the same size / style as the 1939 model you seek, yet have a greater tube count (the 40-155 has 8 tubes) for better performance. Both feature a built in loop antenna so you won't need to string a long wire in your bedroom. Icon_thumbup

Greg V.
West Bend, WI
Member WARCI.org
#4

5 Tube Transitones with nice bakelite case and internal antenna will receive well and are small. Even a Hippo.................6 tube performance.

Paul

Tubetalk1
#5

If you were single I'd recomnend Emerson BD-197.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

Guys in Ron's Philco book it looks like the 39-25t and the 39-30t radios are very much like the 40-150 and the 40-155 radios. The 1939 radios are in Ron's book on pages 114,115. And the 40-150t and the 40-155 radios are on page 128. Are all these radios similar? Which ones play the best? And do any of our Phorum members have these in their collection? One of these would be the next purchase that I would make if I was to find one . I just like the style of these waterfall little radio cabinets. Thanks in advance for your help!
#7

The 1939 models do not have built-in loop antennas as Greg has already mentioned above, therefore the cabinets are not as deep as are the 1940 and 1941 versions.

The 1940 and 1941 models will play the best, but beware the 1941 models are a nightmare to restore. All of them have rubber-covered wiring...but the wiring in the 41-250 and 41-255 is worse, especially around the band switch. You must be very careful around the band switch when rewiring a 41-250 or 41-255 - the band switch is very easily broken. Don't ask how I know. Icon_redface

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Made mistake & did not label connection
You haven't given us the model number of the set so I looked up the 6A8 pin assignment. Pin 8 is the cathode and pin 7 i...RodB — 01:19 PM
Made mistake & did not label connection
Happy Thanksgiving all! I have made a real bonehead mistake this time. Hope someone can help.  I am trying to determi...georgetownjohn — 12:51 PM
New Philco Repair Bench
Apparently there is a new Philco Repair Bench found at https://philcoradio.com/repairbench/ When I try to go to order a ...dconant — 12:00 PM
Philco 60 Squealing
Well, a wave trap is a trimmer in series with the coil so at the resonant frequency it provides a short to ground. This ...RodB — 10:07 AM
Philco 60 Squealing
Rod, My radio is run 7. The wave trap is on that schematic as shown in the picture. dconant — 09:21 AM
American Bosch Model 802 auto radio
Hi Arran ,  Thanks for your help with this radio.And especial thanks for letting me know to look it up under United Ame...Antipodal — 04:32 AM
Philco 60 Squealing
Usually a wave trap is for keeping IF signals from entering the antenna and from leaving the antenna. You feed an IF sig...RodB — 09:30 PM
Philco 60 Squealing
I just peaked it for the best signal at 600. NULL it for IF frequency, originally it would have been null for 500kh...Chas — 08:05 PM
Philco 60 Squealing
Wavetrap no longer matters.morzh — 05:19 PM
Philco 60 Squealing
Rod, I had checked out your suggestions but did not help. I did solder the ground rivets to the chassis as Chas suggeste...dconant — 04:52 PM

[-]
Who's Online
There are currently 2190 online users. [Complete List]
» 1 Member(s) | 2189 Guest(s)
Avatar

>