Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New purchase
#1

I saw this 46–1209 Code 122 on Craigslist, it was local so I figured why not?

Only $40. Everything seems to be there and is pretty dusty/grimy as I would prefer (hopefully it means nobody has been in and hacked the electronics).


   

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#2

Nice Post War pick up, dial is different and I think kinda neat, that is an 8 tuber I belive and has a turntable? 

How is the record player looking? Was the cat included?

For 40.00 a good deal, even if only for tubes.

Paul

Tubetalk1
#3

For $40 not bad.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#4

The cat is my "assistant" who likes to steal my paperwork and breakfast sausage when I'm not looking.

The seller's story: he was driving through a poor neighborhood here in Chicago 25 years ago and a guy was sitting out on the street trying to sell the radio. He brought it home, plugged it in and it didn't turn on so he just had it as a nostalgia piece. He said he had a bunch of other old radios for sale too... I got out of there to save my wallet!

Yes, eight tubes. One of them was missing and one of the tubes in the set wasn't correct. Three tubes of the seven extant were shorted or tested bad, one is marginal, three are good (7C6, a 7H7, and 5Y3G). The turntable is original and filthy, but all there. Unfortunately, at some point someone twisted the arm and it's cracked back near the base... I'll need to find a replacement or somehow massage the existing one back into shape.

The grille cloth is perfect in it and the speaker looks intact too. I pulled the chassis out and sure enough, period-correct Philco and Sprague caps, etc. The wiring inside is soft and pliable and not crumbling, but everything outside of the chassis is shot.

The big metal loop antenna is there.

The cabinet isn't too bad. Some wear and dings, and a couple spots of chipped veneer on the top at the back.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#5

Too bad on the tubes, but sounds like you may get her running. Good luck. 

Have an Old Style and celebrate.

Paul

Tubetalk1




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM

[-]
Who's Online
There are currently 7004 online users. [Complete List]
» 1 Member(s) | 7003 Guest(s)
Avatar

>