Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

ID on this one tuber...?
#1

Any thoughts on manufacturer and model for this one tube radio or tuner?  

The one tube is a 32 and in this set its a Wards Airline 32 though that doesn't mean its a Wards Airline set.  The socket is engraved with 32 as well, so that's the right tube for the set.   One knob flips the back end of the two coils to align the coils, one turns what looks like a rheostat and the center knob turns the tuning cap.  On the back of the chassis is a two prong jack for "phone". Not much else to it.  The front has an Indian and a Covered Wagon design.

Thanks for the help!!!  Icon_thumbup

[Image: https://www.dropbox.com/s/rpmikemhihm32a....jpg?raw=1]

[Image: https://www.dropbox.com/s/cn1q3hp6s0qpp1....jpg?raw=1]

[Image: https://www.dropbox.com/s/gt651iuktmn7vw....jpg?raw=1]

[Image: https://www.dropbox.com/s/7rmcy4d7mo6tw0....jpg?raw=1]

[Image: https://www.dropbox.com/s/tcysa07yxkzaam....jpg?raw=1]

[Image: https://www.dropbox.com/s/zwgmufskldxsbw....jpg?raw=1]
#2

Wow, that's about as bare bones as you can get.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#3

Certainly unique looks like a WPA project?!

Paul

Tubetalk1
#4

Very kwel!!! I would guess that it was a kit of some sort. It is regenerative, the knob one the left control the regeneration, center knob is the tuning and the the knob on the right adjust the filament voltage.
Not sure about the filament wiring as the pic doesn't show it well.


Attached Files Image(s)
   

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

Was hoping you would comment Terry. I will take a closer look at wiring next trip to the museum but I think you have it pretty close!
#6

Obtw I forgot the ant wire, it's the long white that is going diagonally across the bottom of the chassis.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

At least it won't take long to recap!  Icon_lol

Ron

Bendix 0626.      RCA 8BX5.   RCA T64
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-42        Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84
#8

At first glace I thought that it may have been a short wave convertor of some sort, but since it is obviously battery operated, and has no provision for connecting it into the front end of another set, it must be a regenerative receiver, or perhaps a tuned RF amp of some kind.
Regards
Arran
#9

Methinks the connector on the back that sez phone is the give away. If time was no object you could have a look at some magazines from that time period (1931-34) something like Shortwave Craft or Radio News. You maybe able to find an ad or short article on it. Unfortunately it's a very common circuit from back in those days.
The cabinet looks to be home made or something that was repurposed (to use a modern term)

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#10

I've found some ads in old Popular Mechanics that discuss one-tubers like this one. Nothing with the Indian motif, though. I wonder if this was intended for a Boy Scout cabin or something similar.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#11

You got the circuit ID'd Terry and if it is one of those kit jobs from back then it could easily have been some small outfit that didn't last too long or as Arran suggests the cabinet may be a home made job. Wallace, thx for looking in the old mags!!
#12

That's a fantastic art deco cabinet! The whole "opening of the Western frontier" theme that was so common in the early '30s. The native guide, the big farmhouse, the airplane at the top, all surrounded by the rays of the rising sun... I would certainly love to have something like that in my collection!

The cabinet doesn't seem homemade to me. Too detailed.
#13

That thing gave me the willies!!!!!   Icon_eek




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently no members online.

>