Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Old Radio Parts Questions
#1

Friend of mine dropped off all these NOS in box and miscellaneous radio parts. I think he said found them in a relative's attic.
I wonder if some of you that are parts gurus could tell me anything.

Does it fit any specific model or series?
Is it rare?
Is it worth anything?

(Are the transformers shipped in pieces for patent reasons?)

All comments welcome! (Please refer to picture number.)
Much appreciated!

Rob

[Image: https://s26.postimg.org/8t000yjp5/image.jpg]
[Image: https://s26.postimg.org/jtv55zby1/image.jpg]
[Image: https://s26.postimg.org/wdq9tq055/image.jpg]
[Image: https://s26.postimg.org/oxvllo1tl/image.jpg]
[Image: https://s26.postimg.org/3zku9ucl5/image.jpg]
[Image: https://s26.postimg.org/fas3by8u1/image.jpg]
[Image: https://s26.postimg.org/6fmnnount/image.jpg]
[Image: https://s26.postimg.org/l2nm5cta1/image.jpg]
[Image: https://s26.postimg.org/hdxx5vj95/image.jpg]
[Image: https://s26.postimg.org/wvlf9kpq1/image.jpg]
#2

[Image: https://s26.postimg.org/y834bgn5l/image.jpg]
[Image: https://s26.postimg.org/n0ua3clrt/image.jpg]
[Image: https://s26.postimg.org/df0pn1um1/image.jpg]
[Image: https://s26.postimg.org/6m0cqs3sp/14_A.jpg]
[Image: https://s26.postimg.org/c2nlywmk9/14_B.jpg]
[Image: https://s26.postimg.org/aq5wx0p4p/15_A.jpg]
[Image: https://s26.postimg.org/429baf5mh/15_B.jpg]
[Image: https://s26.postimg.org/xdprgwu2h/image.jpg]
#3

[Image: https://s26.postimg.org/kh38mznll/17_A.jpg]
[Image: https://s26.postimg.org/9g83hyvcp/17_B.jpg]
[Image: https://s26.postimg.org/4gana0pq1/17_C.jpg]
[Image: https://s26.postimg.org/trfcqiybd/image.jpg]
[Image: https://s26.postimg.org/6ootrcwu1/19_A.jpg]
[Image: https://s26.postimg.org/e9wg0kh89/19_B.jpg]
[Image: https://s26.postimg.org/pc1iz0bax/19_C.jpg]
[Image: https://s26.postimg.org/tstvxopix/image.jpg]
#4

Many parts, including the variometer in #1 and some of the tube sockets/knob in #18 are from early radios from 20s.
The thordarson and Stancor xfmrs should have all info written right on the packages or the xfmrs themselves.
Another thing is #18 seems to be a surge arrester (lightening suppressor).

there is also a vernier (the tuning scale mechanism) in #19.

#17B is a loudspeaker horn driver (or so it seems).

#16 is a phone jack or some sort of a jack.
#12 is a tuning cap for a linear dial.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

Thanks morzh! I didn't catch the lightning arrester at all, and wasn't sure about the horn driver.
The horn driver is one of the things I kept. He was splitting up the parts with me for testing the tubes (not shown).

Rob




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM

[-]
Who's Online
There are currently 2718 online users. [Complete List]
» 4 Member(s) | 2714 Guest(s)
AvatarAvatarAvatarAvatar

>