Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-675 Deluxe just aquired
#1

And I can't wait to get into it. I've been wanting a nice prewar upper end console for a while and just haven't seen any locally that was worth the asking price. 

As is stands, I do have a 1941 RCA V-205 that isn't in great shape and the chassis has had a couple of major parts replaced that keeps it going, but it's not an open dial console. 

In any case, hopefully I can have it done by Christmas time so that I can actually enjoy in playing OTR while on vacation.

Here is a picture of it.


Attached Files Image(s)
   
#2

By Christmas.....it's a challenge. You have to re-cone the speaker, and it is, if I am correct and it is the same as in 37-116, a 14" one and Sound Remedy for instance do not have any such cones. They suggest a ring and 12" cone which will work but the quality might not be the same.
Plus this is a large chassis probably similar to that of 37-116, with 3 sections and RF sub-chassis.
Go for it Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Beautiful!
I myself bought 2! in the last 3 months. $45.00 and $60.00 so who could pass them up. I gave one to a friend and have the other one going in to a 3rd cabinet another friend gave me.
Are your knobs missing? I think I have a bunch of them minus the lever. You can buy the lever for about $15.00 on eBay. If you need the 4 round knobs just let me know.
Icon_smile (Kirk)


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

Terry!
Do you still have that 675 chassis and speaker from the cabinet you gave me?

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#5

(11-07-2017, 09:23 AM)OldRestorer Wrote:  Beautiful!
I myself bought 2! in the last 3 months. $45.00 and $60.00 so who could pass them up. I gave one to a friend and have the other one going in to a 3rd cabinet another friend gave me.
Are your knobs missing? I think I have a bunch of them minus the lever. You can buy the lever for about $15.00 on eBay. If you need the 4 round knobs just let me know.
Icon_smile (Kirk)

Yes I do have all the knobs, but thank you for the offer!
#6

welcome  xwarp
you can do it Christmas is 6 weeks away still Christmas Snowman Santa

kirk
that cabinet looks like it was under water ??


sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently 2607 online users. [Complete List]
» 1 Member(s) | 2606 Guest(s)
Avatar

>