Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Meissner
#1

I'm working on posting pics and a video of the 4 Meissners that I have been lucky enough to accumulate:

https://www.russoldradios.com/blog

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#2

updated

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#3

Russ;
  I have a Meissner, but it isn't a high end tuner, it's a radio-phonograph-cutter portable. Meissner obviously made the radio chassis and coils, but I think the record player/cutter was made by General Industries. I would like to find a diagram of the cutter as I'm not sure if there are pieces missing.
Regards
Arran
#4

Those Meissners were made by Thordarson-Meissner not too far from here, in Mt. Carmel, Illinois.

Thordarson is still in business but they have moved their headquarters to North Las Vegas, Nevada.

--
Ron Ramirez
Ferdinand IN
#5

I also have a Signal - Shifter EX and a couple of smaller Meissners. I noted that the power trans on one said Meissner - Thordarson, or in reverse.

Meissner is not listed in the Nostalgia Air/Riders database BUT they are in vols. 18 and 19.

And here is some kit info.

http://plymouthcolony.net/starcity/radio...l#meissner

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#6

Russ, Ron;
  I noticed that Meissner used to post a lot of ads in many magazines during the post war period promoting the use of their chassis as replacements in the cabinets of older radios. I don't think that Meissner ever manufactured and marketed complete factory produced units with cabinet the way E.H Scott or Midwest did, I think they only produced and sold chassis with ancillary items like speakers. If they did produce complete sets, such as radio-phono combo units they would probably be very rare. Come to think of it I don't think I have ever seen one of their chassis retrofited into a pre war radio cabinet, in spite of the magazine ads, I did see one that was fitted into a home made cabinet, basically in a box playing the role of a component tuner amplifier, though I am sure that it happened.
Regards
Arran
#7

You might be right, or at least I thought so prior to seeing some of those ads that seem to show radios with cabinets. I need to do some more research.

This actually comes to the heart of my decision to restore these radios. Like a Scott or McMurdo Silver, it is acceptable to display one of these radios in almost any cabinet - or without one - or with one that displays the radio chassis (Clifton) and consider them to be as sold. And since I have no cabinets, figuring out a Clifton-like display would be my next consideration.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#8

There are pictures of the 2961 cabinet in Rider's 19.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM

[-]
Who's Online
There are currently no members online.

>