Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Meissner
#1

I'm working on posting pics and a video of the 4 Meissners that I have been lucky enough to accumulate:

https://www.russoldradios.com/blog

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#2

updated

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#3

Russ;
  I have a Meissner, but it isn't a high end tuner, it's a radio-phonograph-cutter portable. Meissner obviously made the radio chassis and coils, but I think the record player/cutter was made by General Industries. I would like to find a diagram of the cutter as I'm not sure if there are pieces missing.
Regards
Arran
#4

Those Meissners were made by Thordarson-Meissner not too far from here, in Mt. Carmel, Illinois.

Thordarson is still in business but they have moved their headquarters to North Las Vegas, Nevada.

--
Ron Ramirez
Ferdinand IN
#5

I also have a Signal - Shifter EX and a couple of smaller Meissners. I noted that the power trans on one said Meissner - Thordarson, or in reverse.

Meissner is not listed in the Nostalgia Air/Riders database BUT they are in vols. 18 and 19.

And here is some kit info.

http://plymouthcolony.net/starcity/radio...l#meissner

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#6

Russ, Ron;
  I noticed that Meissner used to post a lot of ads in many magazines during the post war period promoting the use of their chassis as replacements in the cabinets of older radios. I don't think that Meissner ever manufactured and marketed complete factory produced units with cabinet the way E.H Scott or Midwest did, I think they only produced and sold chassis with ancillary items like speakers. If they did produce complete sets, such as radio-phono combo units they would probably be very rare. Come to think of it I don't think I have ever seen one of their chassis retrofited into a pre war radio cabinet, in spite of the magazine ads, I did see one that was fitted into a home made cabinet, basically in a box playing the role of a component tuner amplifier, though I am sure that it happened.
Regards
Arran
#7

You might be right, or at least I thought so prior to seeing some of those ads that seem to show radios with cabinets. I need to do some more research.

This actually comes to the heart of my decision to restore these radios. Like a Scott or McMurdo Silver, it is acceptable to display one of these radios in almost any cabinet - or without one - or with one that displays the radio chassis (Clifton) and consider them to be as sold. And since I have no cabinets, figuring out a Clifton-like display would be my next consideration.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#8

There are pictures of the 2961 cabinet in Rider's 19.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Mike; I've only run into a speaker with an open filed coil twice, and they were on newer speakers from the 1940s. One ...Arran — 12:48 AM
An attempt to remove the Field Coil from a G speaker
Arran Yes, this is my plan for now and what do I got to lose, this is not even the speaker from this radio, but one o...morzh — 10:44 PM
An attempt to remove the Field Coil from a G speaker
Mike;  I would unwrap the field coil, and see if maybe there a break near one of the ends, like where the coil wire att...Arran — 10:23 PM
An attempt to remove the Field Coil from a G speaker
...and this is what I did. I fed a little LT into the screwholes with a small brush, and a little on the rim next to the...morzh — 09:52 PM
Philco 40-120C Restoration
I combined the two 40-120C threads together as we like to keep the discussion of the same radio together. It helps with...klondike98 — 09:36 PM
Philco 40-120C Weak, Distorted Ouput
Just checked were I buy tubes price is four dollars. So living in Florid we have a local source for tubes. David    David — 09:14 PM
Philco 40-120C Weak, Distorted Ouput
The higher voltage may be due to higher mains voltage. My mains run 120-125AC when the set was new mains would be 110-11...David — 09:09 PM
Philco 40-120C Weak, Distorted Ouput
Thank you for your reply. I pulled a speaker from a Philco 41-221 and received the same result. I used a signal tracer t...bluecap — 08:45 PM
Philco 40-120C Weak, Distorted Ouput
Have you tried a different speaker? How did you trace the distortion? How do you know it is weak? What is the reference?...morzh — 08:33 PM
Philco 46-480 Electronic Restoration
Amen to that! Every time I think I’ve captured them all, I realize that there’s another error. My goal is to finish with...jrblasde — 07:00 PM

[-]
Who's Online
There are currently no members online.

>