Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need some assistance
#1

I just purchased a Philco Ford radio and record player sold in a nice cabinet. Unfortunately the record player doesn’t work.  I think it’s due to the motor no longer working and would like to get it fixed. 

I would like to know the make model and year and would like to know if you recommended a place where it can be refurbished. 

Please see the attached “unit Identification” sticker
#2

Welcome!
We'll be glad to help. 1st things 1st, your attachment is not showing up. Either you need to upload the image to the Phorum, or upload it to a image sharing service, and include a link in your post linking to the image on the hosting site. Others more experienced can give you exact details.

Blessings,
Jeff W.
Jonesboro, Arkansas

http://jeffsradios.weebly.com

God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
#3

Welcome to the Phorum!

A guide to using image sharing services with the Phorum can be found here:

http://philcoradio.com/phorum/showthread.php?tid=4371
#4

Thanks Jeff, I appreciate your welcome!  Ok, I’ll just type it out, lol

(Upper left corner) 307279 (upper middle) 351610 3 (lower middle) 8576813 (lower right) 1297 C96

Also model C 120 D is stamped in blue underneath the record player.
#5

Welcome to the Phorum!
Icon_wave

Ford bought Philco in 1961 so its no older than that.
#6

Wondering if anyone has any information based on the numbers I posted.
#7

Unfortunately the "newer" units like yours have less info availble. Much of the data is for pre- WW2 an the following decade.
#8

Thanks Bob. All I know so far that it was made after 1966.  I’ll try to get some pictures up to see if that helps.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently 5913 online users. [Complete List]
» 1 Member(s) | 5912 Guest(s)
Avatar

>