Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Green speaker cloth model 45
#1

So another acquisition  a model 45 and (yes I probably paid too much) but no others have shown up at the right time.
I herd someone here talking about the speaker cloth on a 45 being green. This one has olive green kinda shinny cloth around the edges. Looks like it was pretty nice when it was new.
I adjusted the color to make as true as  as possible on my monitor. Has anybody seen this cloth for sale anywhere?


Attached Files Image(s)
   

!!!!!!!!!!!!!!!!!!!RESISTANCE IS FUTILE!!!!!!!!!!!!!!!!!!!!!!  
                           /\/\/\/\/\/\/\/\/\
                                                     
                                 [Image: http://philcoradio.com/phorum/images/smi...on_eek.gif]  Chris
#2

Green? Maybe the cloth has changed color over the decades? Most cloths I've seen are gold. If it's metallic thread woven in there, it could conceivably tarnish and look green. I used cloth pattern #14 from Radio Daze as a replacement. Not a perfect match, but it does have a gold color to it. If you look at the 45C in the Philco Gallery, look for the one submitted by me. That will give you an idea how it looks.

http://philcoradio.com/gallery2/1935a/#Model_45C

http://www.radiodaze.com/grille-cloth-14-item-grc14/

You might also consider the Goldenrod cloth available through Richmond Designs.

http://www.richmonddesignsinc.com/grille...e#Previous

Regards,

Jeff Wiles
#3

I think the olive green is correct. It looks preserved around the edges. This cabinet design was to look like a butterfly. I think they wanted it to have color. Notice the horizontal lines are light colored maybe white. Most philcos had very dark lines like these.

!!!!!!!!!!!!!!!!!!!RESISTANCE IS FUTILE!!!!!!!!!!!!!!!!!!!!!!  
                           /\/\/\/\/\/\/\/\/\
                                                     
                                 [Image: http://philcoradio.com/phorum/images/smi...on_eek.gif]  Chris
#4

I have seen the 45 with both green and gold grille cloth. I agree that the green would be original.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>