Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

How to Soften Leather/Cowhide cases.
#1

What is the best product to use on old leather/Cowhide cases? I have seem some portable tube radios with these cases and, of course, early transistor radios. What got me thinking about this is the Magnavox Envoy transistor radio I decided to try out today. Got it basically for free in a box of parts I bought ages ago and it's been a shelf queen ever since as the case is hard and it is missing a knob bright. Still, a new battery and a shot of control cleaner brought this crazy thing back to life! So, even though it's not in perfect shape, I'd like to try and keep it from getting worse. At least I would like to use something where the back 'hinges' for the battery and chassis access.

No matter where you go, there you are.
#2

My go to for old leather is neats foot oil  NOT COMPOUND. Leather will soak the stuff up may take many applications to get the leather nice and soft. David
#3

Thanks! I thought I recalled something like that from years ago, but if I recall right, it was near impossible to find around here at the time.

No matter where you go, there you are.
#4

Tractor Supply has it...
#5

Found some at my local Tractor Supply. They all said compound on the containers, so I just picked up the smallest one they had that said it was for softening leather. Had to look with the harness supplies.

No matter where you go, there you are.
#6

Compound contains stuff other than neats foot oil like petrochemicals try amazon get the good stuff. David
#7

Well, that's $5 down the drain. Icon_sad

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4296 online users. [Complete List]
» 1 Member(s) | 4295 Guest(s)
Avatar

>