Zenith MT 1990 Stereo Console
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
05-01-2018, 03:41 PM
This is the result of a want ad I put up on Craigslist. I wanted a Zenith to go along with my big RCA, solid state console stereo and this is the result barely 24 hours after putting the ad up! Yep, I've gone off the rails on the crazy train again! Not only has this console come from the original family that owned it since new, it is the tube/transistorized hybrid model that I have always thought were odd pieces. It does play, but the volume on FM is low. According to the eye tube it's pulling in the stations well, but just low volume. There are two possible issues that could be causing this. One, the 6JK8 and 6EA8 tubes are both weak and I don't have any good spares right now. Also, in spite of multiple cleanings, the two FM selections are still very scratchy and dirty. Either way, I plan on getting this reworked over in the future. I guess the changer is belt driven and I can tell it is slipping some. Still, it cycles fine once up to speed and even that folding 45 spindle works good.
At five foot, seven inches, this is the biggest stereo console I will ever own. Oddly, I can't find any information on this model.
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Like the legs! Obviously that was produced around the end of the Mid Century Modern era, mid-late 1960s.
--
Ron Ramirez
Ferdinand IN
Posts: 289
Threads: 42
Joined: Jan 2014
City: Jeffersonville
State, Province, Country: PA
I grew up with one of those. My mother loved it and used crank it up on weekends cleaning the house. When they moved she gave it the movers.
Posts: 15,819
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Yes, the angled legs were the signature of 60s (in my country - also 70s, we lagged by some 5-190 years).
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks, everyone! I was trying to find one with the louvered doors over the speakers, but once the lady texted me the picture of this unit, I figured it was close enough! If all goes right, this console will be going up to my buddy's shop for repairs on Saturday. He has the space, parts, and tools needed that I don't have to redo this unit. Also, I'd rather have it fully redone BEFORE heaving it up to the trailer where it will live for the foreseeable future. Still needs two tubes (possibly a third as one tube wasn't on the list for my checker).
What is odd, I don't EVER recall seeing stereos like this around my town when I was a kid. Yes, people had 60's and 70's stereo consoles, several serving as TV stands in the 80's, but they were always the regular floor consoles. It hasn't really been until recent years that I even was aware of this style. I guess getting this console and accepting the Silvertone is making up for all the stereo consoles I refused over the past 20 years. Could have had several for free, but I doomed them to the dump, even fully working ones. With 8 speakers, this should be a good sounding unit!
No matter where you go, there you are.
(This post was last modified: 05-03-2018, 02:50 PM by Jayce.)
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Ok, this Zenith is slowly turning into a nightmare. So far they've had to replace two output transistors that weren't working, figure out five electrolytic cans on the amp, and the FM wasn't working again. It now has Mono FM, but it appears someone has been into the tuning chassis before and performed a hack job on it. I thought something was missing from the chassis before I took this stereo up to be worked on and my fears were confirmed. Someone hacked out the multiplex in it along with the transistor and socket that ran the multiplex. The tip off was the newer capacitors they found under the chassis once the bottom shield was off. I don't think Zenith used the 'orange drop' caps. All my vintage Zenith stuff, even the 70's TVs have the brown mylar caps. Oh, on top of these issues the unit now refuses to play the left channel on the phonograph and they can't get the phonograph apart! The rubber grommets the upper turntable rides on have deteriorated and 'glued' everything together! (They checked the cartridge and it is fine.) Looks like the Silvertone might be the best part of this deal. It has some issues, but all appear to be easily corrected!
No matter where you go, there you are.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
trying to identify this wire type
|
Here's one source for your wire of many.
Take care and BE HEALTHY! Gary
P.S. Can't get the right color you need? I ...GarySP — 06:40 PM |
trying to identify this wire type
|
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM |
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM |
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM |
trying to identify this wire type
|
The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
trying to identify this wire type
|
Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
Philco 60 Squealing
|
All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
Philco 60 Squealing
|
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
Philco 46-420 Code 121 Reception issues
|
Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
Philco 46-420 Code 121 Reception issues
|
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
Who's Online
|
There are currently 4077 online users. [Complete List] » 2 Member(s) | 4075 Guest(s)
|
|
|
|