Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 144H - How far to go?
#16

I always thought CW is just todays regular radio transmission, ever since Fessenden to invented it to replace Marconi's spark gap. And it should not require anything as this is what all the broadcast station transmit. No?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#17

CW is the carrier with no modulation.

SSB is just the opposite - one modulation side band with no carrier.

The BFO generates a carrier which becomes a heterodyne with the CW transmission resulting in a tone.
The BFO's carrier is used to demodulate the SSB modulation.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#18

Yes I did refinish the cabinet. Thanks for the compliments. I enjoy refinishing old pieces. I know some say to leave in original condition (don’t refinish) but if I’m keeping the piece I’m finishing it to my liking. It appeals to my meticulous nature and the cabinet being a family heirloom was a bonus. And, yes I was pleased that the cloth was intact, other than a few stretch/poke marks. 

See you in the electronics phorum. Hopefully the electronics won’t take me the same six years that I spent off and on getting the cabinet finished. 

As I enter the electronics phorum, can you confirm what my chassis is?  It isn’t the same as the cabinet style (144H), correct?  The sticker inside the cabinet says Philco Models 44,504,& 144. In the lower left corner of that sticker I see 38-3385 (although the 8’s could be 6’s—hard to discern). And inside the chassis is stenciled 38 1222. When I look in the electronics phorum people seem to refer to the chassis by a number and I want to know what mine is as I venture on.
#19

Hi Chas,
You might have a look at the back of the tuning capacitor sometimes the model # is stamped on it in ink.
Sorry the link I posted previously was dead try this: http://www.nostalgiaair.org/Resources/137/M0013137.htm
I'm about 99% sure it's a model 144 chassis

GL

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#20

I can confirm that it is a 144.

--
Ron Ramirez
Ferdinand IN
#21

Very nice radio! It's just a fantastic and stylish design . Icon_cool




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New member
Hi. I specialize in refurbishing Predictas, but I'm in Chicago. If you can get it to me, I'd be happy to go over it. ...Bob Andersen — 06:43 PM
An attempt to remove the Field Coil from a G speaker
I have 3 G speaker, all with open Field coils. Today I pull one of the shelf and decided to try to remove the FC (spo...morzh — 06:07 PM
Philco 91 Restore Code ??
Thanks Mike. I will check them out.dconant — 05:52 PM
Philco 91 Restore Code ??
There is no such thing as bad Fluke. This said, they are expensive. A Fluke is easily 10x the price of comparable CCC...morzh — 05:45 PM
Philco 91 Restore Code ??
Hello Mike, Yes, I have 3 Fluke meters one being my first Fluke 77 and other being Fluke 87. My third is Fluke clamp -...radiorich — 05:04 PM
Philco 91 Restore Code ??
I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM
Philco 91 Restore Code ??
Yep. 10W is probably enough. Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM
Philco 91 Restore Code ??
I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM
Philco 91 Restore Code ??
No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM
Philco 91 Restore Code ??
Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM

[-]
Who's Online
There are currently 2691 online users. [Complete List]
» 1 Member(s) | 2690 Guest(s)
Avatar

>