Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith 7G605 Transoceanic - the Clipper
#31

No, everything is much simpler: the exterior is always covered with yellowish semi-translucent was that muddies the surface color and could be there in lumps/frozen droplets.
While opening the caps, which is heating them and pulling the wax plugs with the wires out, the outer wax melts and is wiped off when holding caps to pull the plugs, so the paper become exposed and, especially in Zeniths' cases where it is bright orange, looks brighter afterwards.
No special restoration of the exterior, none usually needed - it is pretty sturdy.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#32

Need the cord for tuning cap: will buy on RR.

Does anyone know the cord winding diagram?

On a sidenote: tested the tubes; all are OK, though the 1LA6 converter has Pentode at 500 at desired 1000. I am sure it will work fine, will replace if available. Oh....I have the second radio. Maybe there it is better.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#33

Mike, I may have a spare 1LA6. Let me know if you want me to dig around the tube boxes.

Paul

Tubetalk1
#34

Paul

Thanks for the offer. If anything goes wrong, I'll sure take you upon it. Icon_smile
I have just bought a full set of NIB/NOS tubes for 7G605 off of a guy who sells them. Seems like I bought the last one.
per tube it came out better that buying one of them. It will be good to have a spare set just in case.
Then again, I have a second set which is likely to get restored right after the first, so ....

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#35

I looked, and was mistaken, did not have one so good luck.

Paul

Tubetalk1
#36

Antique electronic supply has N.O.S. 1LA6 tubes in stock:

https://www.tubesandmore.com/products/1la6-heptode

I don't hold with furniture that talks.
#37

Well, they sell it for $12, and so do many folks on eBay.

I bought all 7 tubes, all NIB/NOS for $49 shipped free, which averages $7/tube. Not too bad. Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#38

Mike, when I got back to the other PC last night I cheeked my dial stringing book and no luck on the 7G605, nor do my Zenith schematic books.  I think my dial string is intact if you need me to look at it for you, but it might take a couple of days.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#39

Can't argue with those prices Mike Icon_smile

Good luck with the project - this one has been interesting to watch.

I don't hold with furniture that talks.
#40

My shoulder didn't get fixed but no longer hurts much so I can now get back to it.
Well...first I have to go and meet my in-laws with my wife's niece who are coming to visit from Russia, and it is a 2hrs one way minimum trip to JFK, and with one hand driving....then I can get back to the project.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#41

Yesterday I successfully met my in-laws, them exiting as I walked in, what are the chances, huh, and today I am back at the TO.
I changed the D-battery holder, and though the wires were still pliable, I opened the battery jack and replaced the blue wire, the only one that hardened, and one of the D-cell holder one.
Then I hooked up the speaker, turned the BC band on and powered up. First nothing happened, and I found out the plug wasn't making good contact with the cord. I re-trimmed the cord, exercised the prongs several times so they punctured the cord well, and it started to glow.
The radio noise was there immediately, and it reacted to the tuning. The tuning is very coarse with no vernier, so it took me 6 or so back and forth, but I tuned the local station loud and clear.

So now as I washed my hands extra diligently, a beer is in order. Then the rest.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#42

What kind of beer is on tap today, Mike? I'm thinking a nice cold brew sounds like a great idea myself, soon!   Icon_thumbup
#43

It's Warsteiner. Still have some. Have others but this is what I favor after some hard work Icon_smile Quenches the thirst nicely.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#44

Exciting stuff. There's nothing quite like that moment of first power-on. First the glow, perhaps a little hum, and then static if you are lucky.

...And nothing beats the reward beer afterwards Icon_smile

I don't hold with furniture that talks.
#45

Yep, revives you every single time. Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 80 Antenna Issue?
Hello Hamilton, here is a little information found in our Philco Radio Library at the bottom of the Home page. Hope it ...GarySP — 11:28 AM
Model 80 Antenna Issue?
I did as you suggested and touching the middle of the volume control did nothing so the coil has to be rewound. Any idea...Hamilton — 10:19 AM
1949 Motorola 5A9M
This would be the second portable in the "other radios" forum where I have a similar one in my collection. I h...Arran — 12:41 AM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Hi PittsburgTost. The record changer looks like a Garrard or BSR (Likely Garrard). The spindles just pull out and pu...MrFixr55 — 11:57 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Hello PittsburghToast , Welcome aboard and it looks like gary may have something for you ! now if I dig through my se...radiorich — 11:35 PM
Model 80 Antenna Issue?
You are kind of on the right path. You can touch the grid cap of the Detector/Oscillator 36 tube. I'm expecting a respon...RodB — 08:48 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Welcome to the Phorum, PittsburghToast!  I found an old thread that my interest you regarding the quality and worth of P...GarySP — 08:48 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Welcome to the Phorum! :wave: We do not have anything on that unit in our digital library. There is a Sam's Photof...klondike98 — 08:47 PM
Model 80 Antenna Issue?
I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the re...Hamilton — 08:24 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Hi there! this is my first time posting. I recently picked up this Ford-Philco Console record player and radio at a yard...PittsburghToast — 07:28 PM

[-]
Who's Online
There are currently 800 online users. [Complete List]
» 3 Member(s) | 797 Guest(s)
AvatarAvatarAvatar

>