Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA Victor ID??
#1

All Found a RCA Victor Console.. It has a turntable on top..No model number on it Its at a estate sale.. They want 55.00 for it.. Is it worth that? and What is it??

[Image: https://farm2.staticflickr.com/1949/4363...e390_b.jpg]

[Image: https://farm2.staticflickr.com/1964/4363...51ea_b.jpg]

[Image: https://farm2.staticflickr.com/1920/4363...c493_b.jpg]

Skip
#2

The third picture in this link looks like it.
As far as worth. I guess it's how well you like it. I don't know if that one uses 45 output tubes.
If it does and the ones in it are okay that's good, if not and you have to buy some not good due to the price of 45 tubes.
https://www.radioblvd.com/ConsolePhoto.htm
#3

It is a version of the RCA Victor Talking Machine such as the R-32 with Synchronous tuning.

https://www.radiomuseum.org/r/rca_victor_r_34.html

Cool tuner, but not too valuable ~$50 but the tubes could be worth more.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#4

Used ST style #45s are not as valuable as one would think, more then the #26s and #27s in the rest of the set of course. However I have heard of people substituting 1619 tubes for them, which is a WW2 vintage 2.5 volt 6L6, when needed. If the set is complete, meaning the original phonograph is still intact with it's tone arm, then it's probably worth the $55 if you like it, bring a friend (or two), a tool kit, an an appliance dolly, because those sets are heavy.
Regards
Arran
#5

Thanks I decided to pass. It is very heavy.. I could not get it into my car yet along get it back out..

Plus no space to put it .

Thanks to all for reply's.. Need something smaller..

Skip




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 4101 online users. [Complete List]
» 1 Member(s) | 4100 Guest(s)
Avatar

>