Grill Cloth for Philco Model 51B Cathedral Radio
Posts: 10
Threads: 3
Joined: Nov 2018
City: Wayne
State, Province, Country: NJ
Hello, I am trying to locate grill cloth similar to the pattern in the attached photo. Any assistance is much appreciated. Thank you.
John [url=https://mail.aol.com/webmail/getPart?uid=AFlb9goAAAERWtX-BwyqMExQ1pk&partId=2&saveAs=DSC01494.JPG&scope=STANDARD][/url]
Attached Files
Image(s)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
That isn't the original cloth used in the 51B.
The original cloth looks the same as the cloth used in models 70 and 90, as well as most other Philco cathedral radios made from 1931 - 1933.
Radio Daze:
http://www.radiodaze.com/grille-cloth-02-item-grc02/
--
Ron Ramirez
Ferdinand IN
Posts: 10
Threads: 3
Joined: Nov 2018
City: Wayne
State, Province, Country: NJ
Ron , Thank you for the quick reply. I apologize for stating the incorrect model number. The photo on the tube shield states models 51 or 51A. I think the grill pattern is called a centered "drape" pattern .
If this exact pattern is no longer available, can you suggest one that would be appropriate for this model?
Thanks again,
John
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I already have in post #2, this thread. The cloth you have is old, but is not original to the radio.
--
Ron Ramirez
Ferdinand IN
Posts: 5,085
Threads: 270
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
The Radiodaze link Ron posted is the grill cloth you want. Welcome to the Phorum!
.
Posts: 10
Threads: 3
Joined: Nov 2018
City: Wayne
State, Province, Country: NJ
I’m very surprised to learn that it is not the original cloth. It appears to be made for this radio as the pattern sweeps from the center of the opening. It is at least 60 years old, as it has been the same since I was a child. I’d like to continue to use it, but unfortunately it has a tear, that I do not think can be repaired.
Thanks for the information.
John
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
John
I wasn't (and am not) trying to be mean, really. I was simply pointing out a fact - the cloth you have is
not original to the radio.
I did mention that
Quote: The cloth you have is old, but is not original to the radio.
Given that your 51B is 86 years old, it is quite plausible that the original cloth could have been replaced with what you now have 60-75 years ago.
--
Ron Ramirez
Ferdinand IN
Posts: 4,703
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
That cloth looks like either an RCA (also C.G.E in Canada) but I think some Brand Z models also used similar stuff.
Regards
Arran
Posts: 10
Threads: 3
Joined: Nov 2018
City: Wayne
State, Province, Country: NJ
Thanks Arran. I would really like to find the same pattern, but I don’t think I will.
John
Posts: 330
Threads: 30
Joined: Aug 2017
City: Hay Lakes, Alberta,Canada
I have a couple of Canadian-built RCA Victors that use that cloth.
Posts: 4,703
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I know that one of mine does for sure , it's an RCA-Victor 95T2 from 1939.
Regards
Arran
Users browsing this thread: 3 Guest(s)
Recent Posts
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello,
I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020.
Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit. That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim
Well...a chassis is metal. Magnetic or not, it does not matter.
A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM
Shadow Meter Bulb
Ross
I am not sure what current limiting effect the incandescent provides.
They are two different parts of the sch...morzh — 08:31 PM
Who's Online
There are currently 3942 online users. [Complete List ]» 1 Member(s) | 3941 Guest(s)