Eico 324 Signal Generator Hookup and Usage
Posts: 189
Threads: 22
Joined: Aug 2018
City: Kewanee
State, Province, Country: Illinois
Hey guys I have an Eico 324 Signal Generator and I want to use it to align the 60L I just finished the chassis restoration on. This was a complete restoration including wiring and cap replacement, as well as other repairs. It actually has the voltages all fairly close and actually picked up a local station faintly today, but I'm sure needs alignment badly.
I've never done one before and especially with the signal Generator. I need to know how/where to attach the Generator leads and how to actually set it up to do the alignment. Any assistance would be awesome. This seems to be one of those times it would be great to see someone actually do it, then learn that way and know it forever. Pictures would be great as far as setting the Generator, etc. Thank you and for bearing with my ignorance.
1929 Victor R-32, 1933 60L, Phil 40-158, Phil 42-400X, Phil 47-1230 Radio/Phono,, 1950 Phil TV t-1104, Air King 4000, Philco 41-105, Philco 37-675, RCA Victor 9K2, PT-50, Phil 54C, PT-44 Cabinet, Phil 118X Cabinet
Gregg 
Posts: 69
Threads: 4
Joined: Apr 2016
City: washington nj
Hi Greg...........https://bama.edebris.com/download/eico/324/RF%20Gen%20Mod%20324.pdf. Try this.
Posts: 5,084
Threads: 270
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
John Riders Aligning Philco Receivers is what you need...
The intro to Vol 1 had info on general alignment procedures and the Model 60 specifics is on page 76.
https://archive.org/details/AligningPhilcoReceiversV1
https://archive.org/details/AligningPhil...V2/page/n3
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Use the info that Bob linked to. Here is a video that might help you with how its done.
Not a Philco 60 but the procedure should give you an idea of how to do it.
https://www.youtube.com/watch?v=eDWqSAj-h1I
Posts: 184
Threads: 3
Joined: Feb 2018
City: Chesapeake VA
I'd be rechecking my work and set operation.
In 50+ years I'm yet to see a radio so badly out of alignment that it won't at least receive locals.
Tom
Posts: 358
Threads: 4
Joined: Aug 2015
City: Monteith, Ontario CA
(12-29-2018, 12:54 PM)35Z5 Wrote: I'd be rechecking my work and set operation.
In 50+ years I'm yet to see a radio so badly out of alignment that it won't at least receive locals.
I agree. If all the parts replaced during the restoration were good quality and within tolerance, the set should at least work reasonably well and require very little tweaking.
Did it work before you started?
Posts: 189
Threads: 22
Joined: Aug 2018
City: Kewanee
State, Province, Country: Illinois
Thanks guys, this was an Ebay purchase cheap. No it did not work, and yes it had been Jerried by someone many years ago. I had to make changes to both bring it back to specifications as original as possible as well as update the normal items. Thanks for the downloads, as they are quite helpful. I did speak with Terry today on the telephone and we walked through the alignment together and we did get it playing pretty darn good.
I am continuing to read the various literature and have other items as well to absorb, and will continue to learn this hobby as I really enjoy it. Thank you Terry for your time and assistance today in walking me through the alignment process. It was priceless to me!
1929 Victor R-32, 1933 60L, Phil 40-158, Phil 42-400X, Phil 47-1230 Radio/Phono,, 1950 Phil TV t-1104, Air King 4000, Philco 41-105, Philco 37-675, RCA Victor 9K2, PT-50, Phil 54C, PT-44 Cabinet, Phil 118X Cabinet
Gregg
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
It's my honor sir!!
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 189
Threads: 22
Joined: Aug 2018
City: Kewanee
State, Province, Country: Illinois
12-30-2018, 02:37 AM
The pleasure was mine, thank you!?
1929 Victor R-32, 1933 60L, Phil 40-158, Phil 42-400X, Phil 47-1230 Radio/Phono,, 1950 Phil TV t-1104, Air King 4000, Philco 41-105, Philco 37-675, RCA Victor 9K2, PT-50, Phil 54C, PT-44 Cabinet, Phil 118X Cabinet
Gregg
Users browsing this thread: 3 Guest(s)
|
|
Recent Posts
|
|
Shadow Meter Bulb
|
| Not sure if anyone has tried this but there are 6.3 volt miniature lamps in bayonet and screw-in base options available ...GarySP — 11:31 AM |
|
Shadow Meter Bulb
|
| Any 6.3 volt pilot light will work. I would use the brightest one I could find in my workroom. Be sure the dial is clean...RodB — 10:45 AM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Tim,
nice write up and thanks for sharing !!
Sincerely Richardradiorich — 02:47 AM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM |
|
Shadow Meter Bulb
|
| Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM |
|
Philco 41-608 changer coupler
|
| 3D-printing...short of machining, of course.
Or molding.morzh — 05:20 PM |
|
Philco 41-608 changer coupler
|
| Thanks, Morzh.
That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM |
|
12' Philco
|
| If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel.
Kareem would have an e...morzh — 01:48 PM |
|
12' Philco
|
| And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM |
|
Hickok AC51 tube tester
|
| I think they have only shown the secondaries of the transformer.
Two of them feed the rectifiers' filaments.morzh — 12:58 PM |
|
Who's Online
|
There are currently 8008 online users. [Complete List]
» 1 Member(s) | 8007 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
