Eico 324 Signal Generator Hookup and Usage
Posts: 189
Threads: 22
Joined: Aug 2018
City: Kewanee
State, Province, Country: Illinois
Hey guys I have an Eico 324 Signal Generator and I want to use it to align the 60L I just finished the chassis restoration on. This was a complete restoration including wiring and cap replacement, as well as other repairs. It actually has the voltages all fairly close and actually picked up a local station faintly today, but I'm sure needs alignment badly.
I've never done one before and especially with the signal Generator. I need to know how/where to attach the Generator leads and how to actually set it up to do the alignment. Any assistance would be awesome. This seems to be one of those times it would be great to see someone actually do it, then learn that way and know it forever. Pictures would be great as far as setting the Generator, etc. Thank you and for bearing with my ignorance.
1929 Victor R-32, 1933 60L, Phil 40-158, Phil 42-400X, Phil 47-1230 Radio/Phono,, 1950 Phil TV t-1104, Air King 4000, Philco 41-105, Philco 37-675, RCA Victor 9K2, PT-50, Phil 54C, PT-44 Cabinet, Phil 118X Cabinet
Gregg
Posts: 69
Threads: 4
Joined: Apr 2016
City: washington nj
Hi Greg...........https://bama.edebris.com/download/eico/324/RF%20Gen%20Mod%20324.pdf. Try this.
Posts: 5,060
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
John Riders Aligning Philco Receivers is what you need...
The intro to Vol 1 had info on general alignment procedures and the Model 60 specifics is on page 76.
https://archive.org/details/AligningPhilcoReceiversV1
https://archive.org/details/AligningPhil...V2/page/n3
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Use the info that Bob linked to. Here is a video that might help you with how its done.
Not a Philco 60 but the procedure should give you an idea of how to do it.
https://www.youtube.com/watch?v=eDWqSAj-h1I
Posts: 184
Threads: 3
Joined: Feb 2018
City: Chesapeake VA
I'd be rechecking my work and set operation.
In 50+ years I'm yet to see a radio so badly out of alignment that it won't at least receive locals.
Tom
Posts: 358
Threads: 4
Joined: Aug 2015
City: Monteith, Ontario CA
(12-29-2018, 11:54 AM)35Z5 Wrote: I'd be rechecking my work and set operation.
In 50+ years I'm yet to see a radio so badly out of alignment that it won't at least receive locals.
I agree. If all the parts replaced during the restoration were good quality and within tolerance, the set should at least work reasonably well and require very little tweaking.
Did it work before you started?
Posts: 189
Threads: 22
Joined: Aug 2018
City: Kewanee
State, Province, Country: Illinois
Thanks guys, this was an Ebay purchase cheap. No it did not work, and yes it had been Jerried by someone many years ago. I had to make changes to both bring it back to specifications as original as possible as well as update the normal items. Thanks for the downloads, as they are quite helpful. I did speak with Terry today on the telephone and we walked through the alignment together and we did get it playing pretty darn good.
I am continuing to read the various literature and have other items as well to absorb, and will continue to learn this hobby as I really enjoy it. Thank you Terry for your time and assistance today in walking me through the alignment process. It was priceless to me!
1929 Victor R-32, 1933 60L, Phil 40-158, Phil 42-400X, Phil 47-1230 Radio/Phono,, 1950 Phil TV t-1104, Air King 4000, Philco 41-105, Philco 37-675, RCA Victor 9K2, PT-50, Phil 54C, PT-44 Cabinet, Phil 118X Cabinet
Gregg
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
It's my honor sir!!
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 189
Threads: 22
Joined: Aug 2018
City: Kewanee
State, Province, Country: Illinois
12-30-2018, 01:37 AM
The pleasure was mine, thank you!?
1929 Victor R-32, 1933 60L, Phil 40-158, Phil 42-400X, Phil 47-1230 Radio/Phono,, 1950 Phil TV t-1104, Air King 4000, Philco 41-105, Philco 37-675, RCA Victor 9K2, PT-50, Phil 54C, PT-44 Cabinet, Phil 118X Cabinet
Gregg
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
Who's Online
|
There are currently 3630 online users. [Complete List] » 2 Member(s) | 3628 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|